Agilent, 19095Z-023, J&W HP-1 GC Column, 30m, 0.53 mm, 0.88 µm, 7 inch cage
HP-1 30m, 0.53mm, 0.88u
Catalog Number: 19095Z-023
Send an RFQ.
Category
Loading…
| Capillary Tubing | Fused Silica |
|---|---|
| Film Thickness | 0.88 µm |
| Format | 7 inch |
| Inner Diameter (ID) | 0.53 mm |
| Length | 30 m |
| Phase | HP-1 |
| Polarity | Low Polarity |
| Temperature Range | -60 °C-300/320 °C |
| UNSPSC Code | 41115710 |
| With Smart Key | No |
Answer:The HP-1 capillary is 30 m long, 0.53 mm ID, with a 0.88 µm stationary-phase film.
Answer:No. HP-1 is a low-polarity GC stationary phase; selectivity differs from polar or mid-polarity columns.
Answer:The stated operating range is −60 to 300/320 °C; use the applicable isothermal or temperature-programmed limit.
The Agilent J&W HP-1 capillary GC column provides a low-polarity stationary phase for gas chromatographic separation of compatible volatile and semivolatile organic compounds. This fused-silica column is 30 m long, with a 0.53 mm internal diameter and a 0.88 µm film. The wide-bore geometry supports methods that require the corresponding inlet and carrier-gas settings; its separation selectivity is not interchangeable with a mid-polarity or polyethylene glycol phase. The official temperature specification is −60 to 300/320 °C, where the two upper values reflect isothermal and programmed limits. The column is supplied on a conventional 7-inch cage, without a Smart Key. Establish appropriate conditioning, column flow and detector parameters before routine use, and avoid exceeding the prescribed stationary-phase temperature limits.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
