Agilent, A3000250X046, Pursuit 200Å C18, 4.6 x 250 mm, 5 µm
Pursuit 5 C18 250 x 4.6mm
Catalog Number: A3000250X046
Send an RFQ.
Category
Loading…
| Brand | Pursuit |
|---|---|
| Carbon Load | 12.9 % |
| Endcapped | Yes |
| Guard Column | No |
| Hardware | Conventional |
| Inner Diameter (ID) | 4.6 mm |
| Length | 250 mm |
| Maximum Temperature | 60 °C |
| Molecular Weight Lower Limit | 0 Da |
| Molecular Weight Upper Limit | 3000 Da |
| Particle Size | 5 µm |
| Particle Type | Fully Porous |
| Phase | C18 |
| Pore Size | 200 Å |
| Pressure Rating | 400 bar |
| Product Size | 4.6mm x 25cm 5um |
| Separation Mode | Reversed Phase |
| UNSPSC Code | 41115709 |
| pH Range | 2-8 |
Answer:This Pursuit C18 column has 200 Å pores and 5 µm particles.
Answer:The analytical column is 4.6 mm in internal diameter and 250 mm long.
Answer:No. It is a C18 reversed-phase column; ion-exchange separations require a different stationary phase.
Pursuit C18 is a reversed-phase HPLC column combining a 200 Å pore structure with 5 µm particles in a 4.6 × 250 mm analytical format. Its octadecyl-bonded stationary phase provides hydrophobic retention for a broad range of organic compounds and supports analytical workflows in pharmaceutical research and quality control. The relatively wide pores offer accessible surface area for compounds that can be restricted by smaller-pore silica packings. A 250 mm bed supports separation of demanding mixtures, although the longer path increases solvent consumption and may lengthen run times compared with shorter columns. The specified operating pH range is 2–8; temperature and pressure must also remain within column limits. Select mobile-phase composition and gradient conditions with attention to sample solubility and strongly retained impurities. Filter samples and eluents, protect the inlet from particulate matter and fully equilibrate between sequences. When transferring a method from a different C18 material, verify selectivity, peak symmetry, retention and resolution rather than assuming equivalent performance.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
