G8010-68005, Volatile organic sample introduction kit, for Agilent 5000 series Dual View (VDV/SVDV) ICP-OES
Volatile org. sample intro kit 5100 DV
Catalog Number: G8010-68005
Send an RFQ.
Category
Loading…
| Instrument Compatibility|MultiLine | 5100|5110|5800|5900| |
|---|---|
| Kit Type | Volatile organics |
| Notes | Conikal nebulizer, demountable Easy-fit torch with 0.8 mm id injector, solvent resistant drain tubing and FPM peristaltic pump tubes for sample (white/white tabs) and waste (blue/blue tabs). Requires but does NOT include a cooled spray chamber. The IsoMist peltier cooled spray chamber is recommended. |
| UNSPSC Code | 41113000 |
| Viewing Angle | Dual view |
Answer:No. A cooled spray chamber is required separately. An IsoMist temperature-controlled spray chamber is a recommended compatible choice.
Answer:The fully demountable Easy-fit torch uses a 0.8 mm internal-diameter quartz injector.
Answer:The kit uses white/white FPM tubing for sample delivery and blue/blue FPM tubing for waste, together with solvent-resistant drain tubing.
The Agilent volatile organic solvent sample introduction kit configures 5000 Series dual-view ICP-OES instruments for samples prepared in volatile organic solvents, including gasoline-type matrices. It combines a Conikal U-Series glass nebulizer, an Easy-fit fully demountable torch with a 0.8 mm internal-diameter quartz injector, organic-solvent outer torch components, solvent-resistant drain tubing and FPM pump tubing. White/white FPM tubing serves the sample line, while blue/blue FPM tubing is used for waste handling. The narrow-bore injector and solvent-compatible flow path address the different plasma loading and tubing demands of volatile organic introductions. A temperature-controlled spray chamber is required but is not included in this kit; the IsoMist Peltier-cooled spray chamber is a compatible recommended option. The kit is intended for dual-view VDV/SVDV configurations and must not be confused with the separate radial-view variant. Match sample solvent, torch arrangement and spray-chamber configuration during setup.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
