Agilent, G8410-80103, SPS 4 probe 1.0 mm id with blue markers. Inert, FEP sleeved for SPS 4 autosampler

Agilent SPS 4 FEP-Sleeved Autosampler Probe is a replacement sampling probe for the SPS 4 automated sample introduction platform. Its internal bore is 1.0 mm, and blue identification markers distinguish this probe configuration from alternatives with different inner diameters or construction. The probe uses an inert FEP sleeve and is compatible with SPS 4 autosamplers connected to flame atomic absorption, MP-AES, ICP-OES and ICP-MS instruments. The sampling probe carries liquid from vessels into the instrument's sample introduction pathway, so correct immersion depth and clear internal flow are essential. Inspect the probe and connected tubing for deposits, damage or partial blockage. During replacement, verify the fitting arrangement and probe positioning on the autosampler arm. Confirm that the probe clears rack and tube edges and reaches the intended sampling depth during a controlled positioning test. Use an appropriate rinse program to reduce sample carryover between analyses. This is a probe component, not a complete autosampler or a replacement for its Z-axis belt.