Hach, ASP.CSXXC12113, AS950 Portable Compact Sampler, 2 Sensor Port Options, 12 V, Composite 10 L PE Bottle, Submerged Area Velocity and digital pH Se
Catalog Number: ASP.CSXXC12113
Send an RFQ.
Category
Pack Size1 ea / pack
Loading…
| Alarm | Configurable alarms that show on status screen and are recorded in diagnostics alarm logs. Alarms can be set for system diagnostics and logging such as program end, sample complete, missed samples and full bottle. Channel alarms are setpoint alarms for the recorded measurements (channels), such as pH, level and power supply voltage. |
|---|---|
| Base Configuration | Portable Compact |
| Base Type | Compact |
| Body material | Impact resistant ABS plastic, 3-section construction Double-walled base with 2.54 cm insulation, direct ice contact with bottles (Sampler) |
| Bottle Set | Composite 2.5 gallon polyethylene bottle kit |
| Certifications | CE, UL |
| Communication Capabilities | USB and optional RS485 (Modbus) |
| Data Logging | SAMPLE HISTORY - Stores up to 4000 entries for sample time stamp, bottle number and sample status (success, bottle full, rinse error, user abort, distributor error, pump fault, purge fail, sample timeout, power fail and low main battery). MEASUREMENTS - Stores up to 325,000 entries for selected measurement channels in accordance with the selected logging interval. EVENTS - Ability to store up to 2000 entries in Sample History logging. Records Power On, Power Fail, Firmware Updated, Pump Fault, Distributor Arm Error, Low Memory Battery, Low Main Battery, User On, User Off, Program Started, Program Resumed, Program Halted, Program Completed, Grab Sample, Tube Change Required, Sensor Communication Errors, Cooling Failed, Heating Failed, Thermal Error Corrected. |
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| Diagnostics | View event and alarm logs as well as maintenance diagnostics |
|---|
| Dimensions | Standard Base: 50.5 cm x 69.4 cm (19.9 x 27.3 in.)|Compact Base: 44.1 x 61 cm (17.4 x 24 in.)|Composite Base: 50.28 x 79.75 cm (19.8 x 31.4 in.) |
|---|
| Display | 1/4 VGA, Color; self-prompting/menu-driven program |
|---|
| Factory Installed Options | TWO SENSOR PORTS Accepts Hach digital Differential pH, Hach digital AV9000 analyzer with submerged area velocity flow and/or Hach digital US9000 ultrasonic level sensors |RAIN/RS485 PORT Accepts Hach Rain Gauge (not included) or can be used as RS485 communications |NON-CONTACT LIQUID DETECT Sample volume accuracy for applications that require complete tubing replacement | Please contact your Hach sales representative for details. |
|---|
| Housing Material | PC/ABS blend, NEMA 4X, 6, IP68, corrosion and ice resistant (Controller) |
|---|
| Inputs | One 0/4-20 mA input for flow pacing |
|---|
| Intake | Strainers: Choice of PTFE and 316 stainless steel construction, or all 316 stainless steel in standard size, high velocity, and low profile for shallow depth applications Purge: Air purged automatically before and after each sample; duration automatically compensates for varying intake line lengths Rinse: Intake line automatically rinsed with source liquid prior to each sample, from 1 to 3 rinses Retries or Fault: Sample collection cycle automatically repeated from 1 to 3 times if sample not obtained on initial attempt |
|---|
| Internal Clock | ±1 second per day at 25 °C (77 °F) |
|---|
| Languages | en, fr, es, it, de, pt, zh, tr, hu, cz, pl, ro, hr, el, sl, sk, fi, ru, ja, ko |
|---|
| Lock Function | Access code protection prevents tampering |
|---|
| Manual Sampling | Initiates a sample collection independent of program in progress |
|---|
| Memory | Sample history: 4000 records; Data log: 325,000 records; Event log: 2000 records |
|---|
| Operating Mode | Continuous or non-continuous |
|---|
| Operating Temperature Range | 0 - 50 °C |
|---|
| Power Requirements (Voltage) | 12V Battery |
|---|
| Power Supply | Battery, 12V Lead acid, 3 pin |
|---|
| Probes included | Submerged Area Velocity and digital pH |
|---|
| Programs | Dual Programs: Up to 2 sample programs can be run sequentially, in parallel, or according to day of week scheduling; enabling a single sampler to function like multiple samplers |
|---|
| Pump flow rate | 4.8 L/min (1.25 gpm) at 1 m (3 ft) vertical lift with 3/8-in intake tube typical |
|---|
| Rain Gauge Enabled | No |
|---|
| Rain Gauge Input | No |
|---|
| Sample Container | 1 x 2.5 Gallon L PE |
|---|
| Sample Interval | Selectable in single increments from 1 to 9,999 flow pulses or 1 to 9,999 mins in one minute increments |
|---|
| Sample Pump | High-speed peristaltic, dual roller, with 0.95 ID x 1.6 OD cm (3/8 ID x 5/8 in. OD) pump tube |
|---|
| Sample Temperature | 0 - 60 °C |
|---|
| Sample Transport Velocity | 2.9 ft/s (0.9 m/s) with 15 ft (4.6 m) vertical lift, 16 ft of 3/8-in. vinyl intake tubing, 70°F (21°C) and 5000 ft elevation |
|---|
| Sample Trigger | When equipped with flow sensor or pH/temperature sensor or peripheral monitoring options, sampling can be triggered upon an upset condition when field selectable limits are exceeded |
|---|
| Sample Volume | Programmable in 10 mL increments from 10 - 10,000 mL |
|---|
| Sample Volume Accuracy | Typical: ±5% of 200 mL sample volume with: 4.6 m (15 ft) vertical lift, 4.9 m (16 ft) of 3/8- in. vinyl intake tube, single bottle, full bottle shut-off at room temperature and 1524 m (5000 ft) elevation |
|---|
| Sample Volume Repeatability | Typical: ±5% of 200 mL sample volume with: 4.6 m (15 ft) vertical lift, 4.9 m (16 ft) of 3/8- in vinyl intake tube, single bottle, full bottle shut-off at room temperature and 1524 m (5000 ft) elevation |
|---|
| Sampling Mode | Pacing: Time Weighted, Flow Weighted, Time Table, Flow Table, Event Distribution: Single bottle composite, multi-bottle composite, multi-bottle discrete, bottles per sample, samples per bottle or a combination of bottles per sample and samples per bottle |
|---|
| Sensor Ports | Yes |
|---|
| Sensors | Non oil-filled 0-10' range, 30' cable with connector; Digital pH sensor |
|---|
| Status Messages | Communicates what program is running, if there are any missed samples, when the next sample will be taken, how many samples remain, number of logged channels, time of last measurement, memory available, number of active channels, if alarms were triggered, when alarms were triggered, active sensors and cabinet temperature |
|---|
| Storage Conditions | -30 - 60 °C |
|---|
| Suction Hose Outer Diameter | 1/4" and 3/8" ID PTFE-lined Polyethylene with protective outer cover available in clear and black. |
|---|
| Tubing | Pump tubing: 9.5 mm ID x 15.9 mm OD Silicone Intake tubing: 1.0 - 4.75 m minimum length, 1/4" or 3/8" ID Vinyl or 3/8" ID PTFE-lined Polyethylene with protective outer cover (black or clear) |
|---|
| User Interface | Membrane switch keypad with 2 multiple function soft keys |
|---|
| User Interface Languages | Chinese, English, French, German, Italian, Spanish, Portuguese |
|---|
| Vertical Lift | Maximum of 28 ft using 29 ft of 3/8-in. vinyl intake tube at sea level at 20-25°C (68-77°F) |
|---|
| Warranty | 12 months |
|---|
| Weight | 12.7 kg |
|---|
| What's included? | 1 ea. AS950 controller with sensor ports on compact portable base 1 ea. 12V battery (8754400) 1 ea. Bottle kit (PC010030) includes 2.5 gallon polyethylene bottle w/cap (1918) and full bottle shut-off (8996) 1 ea. 25' vinyl intake tubing (920) 1 ea. strainer (926) 1 ea. Non oil-filled 0-10' range submerged area velocity sensor with 30' cable (77065-030) 1 ea. AV9000S Area Velocity Analyzer (9504600) 1 ea. AV9000S mounting hardware (9506900) 1 ea. digital pH sensor (DPD2P1) 1 ea. pH adapter cable (9501200 (Battery charger 8753500US sold separately) |
|---|
