Hach, LXV440.99.10002, A-ISE sc Low cost ISE Ammonium probe (immersion) with RFID, 10 m cable

Name: A-ISE sc Low cost ISE Ammonium probe (immersion) with RFID, 10 m cable
Brand: Hach
SKU: LXV440.99.10002

Catalog Number: LXV440.99.10002

Pricing

Send an RFQ.

View RFQ List

Category

Single-Use Sensors

TagsOnline Sensors and Controllers Ammonium Sensors A-ISE sc Ammonium Sensor

Description

ISE probe for the on-line measurement of Ammonium provides trending information with minimal maintenance at an affordable price.
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
Comes as a complete system from a single supplier. The probe is installed on the side of the tank. An SC controller completes the system. It can be extended to include an automatic cleaning unit with a compressor.
Prognosys is now available to provide confidence in your instrument readings. Prognosys will monitor and display the reliability of instrument measurement values and identify when upcoming maintenance tasks are due in an easy-to-read color display.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
Cost-Effective Trending Information
The A-ISE sc Sensor utilizes ion selective electrode (ISE) technology to provide your plant with high level trending information while saving money by eliminating the need for reagents and sample preparation. With no sample preparation required beforehand, NH₄-N can be measured during the actual process, ensuring less interruption, reduced costs, time and maintenance
Minimal Maintenance with Simple Cartridge Replacement
The sensor uses a factory calibrated cartridge so little maintenance is necessary. Cartridge replacement is simple: unscrew the old cartridge, plug in the new one, and the sensor is ready for measurement. Using RFID* technology, the factory calibration is automatically identified after replacing the cartridge.
Simple, Accurate Calibration
Easy to perform, fail-safe calibration corrections compensate for naturally occurring calibration drift in ISE instruments. An advanced menu structure allows you to perform corrections without manual entry of values via Ethernet, SD card or Bluetooth
®
.
*RFID version available only in US, EU, Canada, Australia, New Zealand, Croatia, Cyprus and Turkey.

Specifications

Technical Attributes

Measuring uncertainty
Accuracy	5% of measured value + 0.2 mg/L (with standard solutions) NH 4 -N
Cable Length	10 m fixed cable at sensor, available up to 100 m
Cable Length	Standard: 10 m (33.8 ft) Extension cables are available as an option in the following lengths: 5, 10, 15, 20, 30, 50 m (16.4, 33.8, 49.2, 65.6, 98.4, 164 ft)
Calibration Method	With Cartrical plus technology: automatic import of factory calibration data from cartridge to probe by RFID*; 1 and 2 point matrix correction
Controller Compatibility	SC200, SC1000, SC4500. All controllers sold separately
Data Transfer	Current output, relays and bus communication via SC controller
Flow	< 4 m/s max.
Installation Angle	45 ° ± 15 ° (vertical in flow direction)
Length	320 mm
Lower Limit of Detection (LOD)	0.2 mg/L NH₄–N
Material	Cartridge: Stainless steel (1.4571), PVC, POM, ABS, NBR
Measurement Method	Potentiometric ion-selective electrodes for ammonium and potassium, reference system and temperature sensor
Measuring Interval	Continuous

Ordering

Notice

Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:

[email protected]

Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.