Hach, LXV524.99.140A0, SC4200c Claros Connector, External Box for Wi-Fi/Cellular, with plug
Catalog Number: LXV524.99.140A0
Send an RFQ.
Category
Loading…
| Operational Mode | Primary or secondary measurement, calculated value (dual channel only) or timer |
|---|
| Altitude | 2000 m (6562 ft) maximum |
|---|---|
| Analog Output Functional Mode | Linear, PID |
| Cellular | External Box for Wi-Fi/Cellular |
| Communication Capabilities | Profibus DPV1 card |
| Compatible Instruments | Ammonium: Amtax sc, AN-ISE sc, A-ISE sc Nitrate: Nitratax sc, N-ISE sc, Nitratax clear/eco/plus sc Phosphate: Phosphax sc, Phosphax sc LR Organics: Uvas sc pH/ORP: pHD sc, 1200-S sc, 8362sc Conductivity: 3700sc, 3798-S sc, 3400sc Ozone: 9185sc Dissolved Oxygen: LDO 2 sc Chlorine: CL10sc, CL17sc, 9184sc Chlorine dioxide: 9187sc Suspended Solids: Solitax sc, TSS sc Sludge Level: Sonatax sc Turbidity: TU5300sc/TU5400sc, Ultraturb sc, SS7 sc |
| Compatible Network Technologies | GSM 3G/4G (e.g. AT&T, T-Mobile, Rogers, Vodafone etc.) External CDMA (e.g. Verizon) |
| Compliance Certifications | CE approved (with all sensor types). Listed for use in general locations to UL and CSA safety standards by ETL (with all sensor types). Certain AC mains powered models are listed for use in general safety locations to UL and CSA safety standards by Underwriters Laboratories (with all sensor types). |
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| Conduit Openings | ½" NPT conduit |
|---|
| Description | Microporessor-controlled and menu-driven gateway that connects to SC200 or SC1000 |
|---|
| Dimensions | ½ DIN - 144 x 144 x 192 mm (5.7 x 5.7 x 7.6 in.) |
|---|
| Display | None |
|---|
| Enclosure Rating | NEMA 4X/IP66 metal enclosure with a corrosion-resistant finish |
|---|
| Installation Category | Category II |
|---|
| Manual Languages | Danish, Dutch, English, French, German, Italian, Spanish |
|---|
| Material Enclosures | Polycarbonate, aluminum (powder coated), stainless steel |
|---|
| Measurements | One connection to SC controller |
|---|
| Mounting | Wall, Pole, or Panel Mounting |
|---|
| Network Connectivity | LAN version: Two Ethernet connectors (10/100 Mbps), switch function, M12 female D-coding connector. Cellular version: SIM card holder (3G/4G). The type of connection is dependent on controller configuration. |
|---|
| Operating Temperature Range | LAN version: -20 - 60 °C (-4 - 140 °F) Cellular version: -20 - 55 °C (-4 - 131 °F) |
|---|
| Plug | Yes |
|---|
| Pollution Degree | 2 |
|---|
| Power Requirements (Hz) | 50/60 Hz |
|---|
| Power Requirements (Voltage) | 100 - 240 VAC |
|---|
| Protection Class | I, connected to protective earth |
|---|
| Relays | High voltage: Two relays (SPDT) Maximum switching voltage: 250 VAC Maximum switching current: 5 A (resistive only load) Maximum switching power: 1250 VA, 125 W (resistive only load) Wire gauge: 0.75 to 2.5 mm 2 (18 to 12 AWG) Low voltage: Four relays on each low voltage relay module |
|---|
| Storage Conditions | -20 - 70 °C (-4 - 158 °F), 0 - 95% relative humidity, non-condensing |
|---|
| USB Port | Used for data download and software upload. The controller records approximately 20,000 data points for each connected sensor. |
|---|
| Weight | 3.7 lb (controller only, w/o modules) |
|---|
| What's included? | SC4200c Claros Connector, Wi-Fi/Cellular, User Manual, and Power Cable. Remote Service Connector Cable needs to be ordered separately. |
|---|
