Hach, LXV525.97KTO033, LDO sc Model 2 Dissolved Oxygen Sensor, 10 m Cable, Adapter, with SC4500, 2 Channels

Name: LDO sc Model 2 Dissolved Oxygen Sensor, 10 m Cable, Adapter, with SC4500, 2 Channels
Brand: Hach
SKU: LXV525.97KTO033

Catalog Number: LXV525.97KTO033

Pricing

Send an RFQ.

View RFQ List

Category

DO Sensors & Probes

TagsDissolved Oxygen Sensors Online Sensors and Controllers LDO sc Luminescent Dissolved Oxygen Sensors

Description

Accurate process monitoring of dissolved oxygen in water for precise aeration control
Kit including the LDO Model 2 Probe, Mounting Conversion Adapter, and SC4500 Controller (100-240 VAC) with 2 Channels.
For a supremely accurate DO measurements that does not require calibration and is membrane free, turn to an innovator in DO technology, and Hach’s next generation LDO Probe.
No Calibration Required
The Hach LDO sc probe uses luminescent dissolved oxygen technology. Traditional DO probes require DO sensor calibration, which increase maintenance requirements.
No Membranes to Replace
There is virtually no maintenance with Hach's breakthrough luminescent technology. There are no membranes to replace, no electrolyte solution to replenish, and no anode or cathode to clean.
No Missed Cleaning Cycles
The Hach LDO sc probe is equipped with Prognosys, a predictive diagnostic system, that allows you to be proactive in your maintenance by alerting you to upcoming instrument issues. Know with confidence whether changes in your dissolved oxygen level measurements are due to changes in your instrument or your water. To make sure routine cleaning cycles are never missed, the probe offers operators customizable diagnostic alert indicators, ensuring the probe can operate at its maximum performance level.
Customizable service indicators trigger a service message so that a cleaning cycle is never missed.
No Drift
Cutting-edge 3D calibration procedure is conducted prior to shipping, the DO probe will not drift and is more accurate than ever before.
No Complications
Our newest DO probe has a robust design with a smaller footprint allows for easier handling with enhanced durability.

Specifications

Technical Attributes

Accuracy	± 0.05 ppm Below 5 ppm
Accuracy 2	± 0.1 ppm Above 5 ppm
Accuracy 3	Temperature: ± 0.2 °C
Body material	Stainless steel
Cable Length	10 m (33 ft)
Calibration Method	All Probes are factory calibrated and ready to use Air Calibration: one point, 100% water saturated air Sample Calibration: comparison to standard instrument, or comparison to Winkler Titration method
Communication	Modbus via SC controller
Controller Compatibility	SC4500, SC1000, SC200
Diameter	48.25 mm
Flow Rate	None required
Interferences	No Interferences from the following: H 2 S, pH, K + , Na + , Mg 2+ , Ca 2+ , NH 4 + +, Al 3+ , Pb 2+ , Cd 2+ , Zn 2+ , Cr (total), Fe 2+ , Fe 3+ , Mn 2+ , Cu 2+ , Ni 2+ , Co 2+ , CN - , NO 3 - , SO 4 2- , S2-, PO 4 3- , Cl - , anion active surfactants, crude oils, Cl 2 < 4 ppm
Measurement Range 2	0 - 20.00 mg/L
Measurement Range 3	0 - 200 %
Options	Mounting Adapter & SC4500
Outputs	5x mA Output
Power Requirements (Voltage)	100 - 240 VAC ±10%, 50/60 Hz; 1 A

Ordering

Notice

Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:

[email protected]

Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.