| Material | Aluminium alloy |
|---|
| Accessory Brand | Lifemeta™ Manual Crimping Tool |
|---|
| Body Material | Aluminium alloy |
|---|---|
| Die Material | Steel with hardened special surface treatment |
| Bearing Material | 304 Stainless Steel |
| Diameter of Tubing | ID⅛" * OD¼" or ID 3.0mm * OD 6.0mm |
| Weight | 730g |
| Dies Life | Replace the dies every 1000 cycles or every year |
| Delivery Condition | Non-sterile |
|---|---|
| Pack Size | 1/pk |
Answer:It is specified for 1/8-inch ID × 1/4-inch OD tubing or approximately 3 mm ID × 6 mm OD tubing.
Answer:No. The reusable hand tool is supplied non-sterile as one unit per pack.
Answer:The dies should be replaced after 1,000 cycles or one year, whichever occurs first.
The Lifemeta Manual Crimping Tool seals and disconnects compatible flexible tubing in single-use bioprocess fluid paths. A metallic sleeve is positioned over the tubing and compressed by a cutting die to close the line as it is separated. The single-action design is intended for aseptic disconnection in controlled or non-classified environments during sampling, solution transfer, and filling operations. The tool accommodates tubing with an internal diameter of 1/8 inch and an outside diameter of 1/4 inch, or a metric configuration of approximately 3 × 6 mm. Its body is constructed from aluminium alloy, with a surface-treated steel die and 304 stainless-steel bearings. Tool weight is approximately 730 g, and the crimping dies should be replaced after 1,000 cycles or one year, whichever comes first. The tool is supplied non-sterile, one per pack. Select the required sleeve and tubing combination and qualify the seal in the intended process before routine disconnection.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.