| Fiber ID | 0.5mm |
|---|---|
| Length | 30cm (EFA: 800 cm²) |
| MWCO | 750 kDa |
| Filter Format | Lab+ Hollow Fiber |
|---|---|
| Scale | Lab Scale, Process Development |
| Fiber ID | 0.5 mm and 1.0 mm |
| Flow Path | 30 cm (ODxLength: 1.8 * 35.5 cm) 60 cm (ODxLength: 1.8 * 62.0 cm) |
| MWCO | 3/ 5/ 10/ 30/ 50/ 100/ 300/ 500/ 750 kDa |
| Typical Application | E. coli concentration, E. coli homogenate clarification (750 kDa / 0.22 μm) Insulin protein crystallization (0.45 μm) LNP/Exosome concentration and clarification (100/ 300 kDa) |
|---|
| Membrane Material | Modified Polyethersulfone (mPES) |
|---|---|
| Housing Material | Polysulfone |
| Seals (internal) | Epoxy Resin |
| Feed/Retentate Port | 0.5" TC (compatible with 3/4" TC fitting) |
|---|---|
| Permeate Port | 3/8" HB |
Answer:Approximately 0.08 m² (800 cm²) with 0.5 mm ID fibers and 30 cm length.
Answer:Lab+ has a larger 800 cm² membrane area, compared with approximately 236 cm² in the Lab module of the same fiber length.
Answer:Do not assume autoclave compatibility for 0.5 mm fibers; use the compatible cleaning and sanitization procedure.
The Biophsep Lab+ hollow fiber module is a reusable modified-polyethersulfone tangential-flow filtration device for process development at larger laboratory volumes. The 750 kDa nominal cut-off, 0.5 mm fiber internal diameter and 30 cm fiber length suit high-cutoff separation and clarification studies requiring a compact, scalable flow path. Unlike the smaller Lab module, the Lab+ configuration provides approximately 0.08 m², or 800 cm², of membrane area through a larger fiber bundle. Applications include concentration, diafiltration and clarification in protein, microbial or viral-vector process research, depending on particle size and membrane passage behavior. Plan the crossflow and transmembrane-pressure setpoints using representative feed and monitor permeate flux, retention and product recovery. This variant is nonsterile and reusable after compatible cleaning and sanitization; 0.5 mm fibers should not be assumed compatible with autoclaving. Select connections and tubing to match the Lab+ housing and required process volume.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| Compliance | USP <788> Particulate Matter USP <87> Cytotoxicity USP <88> Biological Reactivity FDA Indirect Food Additives, 21 CFR 177-182 ADCF Materials |
|---|---|
| Bacterial Endotoxin | Endotoxin Limit of WFI System<0.25 EU/mL with the Limulus Amebocyte Lysate (LAL), USP <85> |
| Reusable | Yes |
|---|---|
| Pre-use Treatment | NaOH Sanitization for Pyrogen Removal |
| Sterility | Non-sterile |
| Pack Size | Pack of 1 |
|---|---|
| Packaging | Individually packed in a double PE bag |