Cobetter, SSBG01L12A01, 125 mL~1 L Lifecube™ SSB Bottle Assemblies 2-port Screw Cap with Tubing, Sterile 10/pk

Lifecube SSB 1 L single-use media bottle assemblies provide a sterile vessel and preassembled fluid connections for preparing, holding, and transferring culture media, buffers, sera, and other bioprocess liquids. The transparent PETG bottle is fitted with a polypropylene two-port screw cap. One port is connected to a 20 cm platinum-cured silicone feed line with a metallic crimp sleeve and ECS female connector; the second incorporates a short silicone vent line with a vent filter. An internal silicone dip tube supports liquid withdrawal from the bottle. The PETG bottle is specified for operation from −40 to 60 °C and is gamma sterilized before delivery. PETG assemblies should not be autoclaved. The Lifemeta STT silicone feed tubing has a nominal 1/4-inch internal diameter, while the vent line uses nominal 1/8-inch ID silicone tubing. The bottle configuration is suited to small-volume sterile solution preparation and transfer, where a sealed fluid path reduces repeated manual opening. Check connector compatibility, extractables requirements, and validated operating limits before incorporating the assembly into a process.