| Process Connection | G 1¼ inch (Ingold) |
|---|---|
| Sensor Family | Oxyferm XL |
| Wetted Parts | Stainless Steel 1.4435; EPDM (Ethylene propylene elastomer); FKM (Fluorocarbon Elastomer); VMQ (Silicone elastomer); See compliance details in Material Specification document |
| Electrical Connector | T82/D4 |
| Measuring Range | 10 ppb to 40 ppm (DO) or 0.2 to 1000 mbar (pO₂) |
| Electrolyte | Oxylyte |
| Drift at Room Temperature | < 1% per week |
| Membrane Cap | Standard |
| Oxygen Consumption | Ca. 20 ng/h in air at 25 °C |
| Temperature Sensor | NTC 22 kOhm |
| Current in Air at 25 °C | 40 - 80 nA |
| Surface Quality of Steel | Ra < 0.4 µm (N5) |
| Electrode system | Silver platinum combination |
| Polarization Voltage and Time | -670 ± 50 mV, ≥ 2 hours |
| Serial Number | Yes |
| Certificate | Material and Performance Test Certificate |
| ATEX Approval | II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db |
| IECEx Approval | II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db |
| Diameter |
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| 25 mm |
| Autoclavable | Yes |
|---|
| Steam Sterilizable | Yes |
|---|
| CIP | Yes |
|---|
| Operating Temperature Range | 0 to 130 °C |
|---|
| Pressure Range bar g | 0 to 4 bar |
|---|
| Max. CO₂ Partial Pressure | 0.01 bar |
|---|
| Required Flow | ≥ 0.03 m/s |
|---|
