Merck, CTGB74TP3, Aerex®Cartridge

Name: Aerex®Cartridge
Brand: Merck
SKU: CTGB74TP3

Size:3 pkg, Aerex® Cartridge Filter, Chemistry: 0.2 µm Hydrophobic Polytetrafluoroethylene (PTFE) Configuration: 40 in. Code 7

Catalog Number: CTGB74TP3

Pricing

Send an RFQ.

View RFQ List

Category

Cartridge Filters

CollectionsMerck Cell Culture Supplements & Reagents: Complete Solutions for Research & Bioproduction Merck Roche Life Science Products for PCR, RT‑PCR & Nucleic Acid Purification

Description

General description
Device configuration: Cartridge
Cartridge type: Gas
Features and Benefits
This product has been qualified to retain a ΦX174 virus aerosol challenge of 10⁸ to 10¹⁰ PFU at an air flow rate of 50 SCFM per 10-inch cartridge after 50 steam-in-place cycles at 145 °C.
Packaging
Double Easy-Open bag
Preparation Note
Sterilization Method: 200 (150 forward/50 reverse) SIP cycles of 30 min at 145°C; SIP up to 165 hours in forward direction at 145°C

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note
Gravimetric Extractables: The extractables level was ≤ 35 mg per 10-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
HydroCorr: ≤ 0.40 mL/min per 10-inch cartridge with water at 1380 mbar (20 psig)
Other Notes
Directions for Use:
Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer to Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
Storage Statement: Store in dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Legal Information
AEREX is a registered trademark of Merck KGaA, Darmstadt, Germany

Specifications

General

UNSPSC Code	23151806
Web Name Suffix Override	cartridge nominal length 40 in. (100 cm), filter diam. 2.7 in. (6.9 cm), Code 7
Web Name Override	Aerex® Cartridge Filter
material	polypropylene device
Quality Level	400
feature	hydrophilic
manufacturer/tradename	Aerex®
parameter	≤60 mL/min nitrogen diffusion at 690 mbar (10 psig) and 23 °C (in 60/40% IPA/water)
cartridge nominal length	40 in. (100 cm)
device size	40 in.
filter diam.	2.7 in. (6.9 cm)
filter filtration area	2.6 m2
impurities	≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
gravimetric extractables	≤35 mg/cartridge
matrix	Aerex®
pore size	0.2 μm pore size
bubble point	≥900 mbar (13 psig), nitrogen with 60/40% IPA/water
code	Code 7

Ordering

Notice

Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:

[email protected]

Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.