Description
EpiTect Bisulfite Kits enable complete conversion of unmethylated cytosines to uracils and subsequent purification in 6 hours. The EpiTect 96 Bisulfite procedure takes less than 7 hours. The highly sensitive method utilizes innovative protection against DNA degradation that guarantees sensitive results, even from 1 ng DNA, and ensures high conversion rates of over 99%. Due to its unique DNA Protect technology, EpiTect Bisulfite converted DNA is highly suitable for whole bisulfitome amplification using EpiTect Whole Bisulfitome Kits. This enables reliable amplification of DNA in cases where bisulfite converted DNA is limited. EpiTect Bisulfite Kits include a spin-column or 96-well format procedure, and can be processed using a centrifuge or vacuum manifold. In addition, the EpiTect Bisulfite Kit can be fully automated on the QIAcube Connect.
Rapid results The complete EpiTect Bisulfite Kit centrifugation or vacuum procedure — from DNA to pure bisulfite converted DNA ready for analysis — takes only 6 hours. The EpiTect 96 Bisulfite procedure takes under 7 hours. Traditional bisulfite conversion procedures can take over 18 hours and require extensive user interaction (see table "Fast and Easy Bisulfite Conversion "and figure "Time saving procedure"). The EpiTect Bisulfite Kit provides everything required for successful bisulfite conversion and DNA cleanup. Fast and easy bisulfite conversion EpiTect procedure Traditional procedure Reagent setup 10 minutes; prealiquoted solutions 40 minutes; reagent setup needed Bisulfite reaction 5 hours 16 hours Purification 30–45 minutes; EpiTect spin columns and plates 120 minutes; purification, desulfonation, precipitation, and washing steps Complete DNA conversion Each EpiTect Bisulfite Kit reaction converts 1 ng – 2 µg of DNA with equal efficiency. The novel procedure and optimized buffers enable the recovery of high yields of converted DNA. The highly efficient cytosine conversion is apparent by the low C T values obtained when amplifying converted DNA using real-time PCR (see figure "Complete cytosine conversion"). Analysis of EpiTect Bisulfite Kit converted DNA shows over 99% conversion of unmethylated cytosines (see figure "Highly efficient cytosine conversion"). This high conversion rate provides repeatable and dependable downstream analysis.
Bisulfite conversion of challenging samples Due to the limited amount of DNA available, determination of methylation patterns in DNA from precious and limited sample materials (e.g., formalin-fixed paraffin-embedded [FFPE] or microdissected tissue) is especially challenging. However, such sample types are of specific interest for the successful identification of valuable disease-predicting biomarkers. EpiTect Bisulfite Kits address these challenges with optimized protocols for these sample types (see figure "Methylation detection from FFPE tissue samples"). All of the required buffers and reagents are provided, and only minimal handling is required. For direct bisulfite conversion of DNA from FFPE samples, cells, blood, and tissue without prior DNA isolation, we recommend EpiTect Plus FFPE Bisulfite Kits and EpiTect Plus LyseAll Bisulfite Kits. Preventing DNA fragmentation DNA Protect Buffer is uniquely formulated to prevent DNA fragmentation (usually associated with bisulfite treatment of DNA at high temperatures and low pH values) and provide effective DNA denaturation, resulting in the single-stranded DNA necessary for complete cytosine conversion (see "Unique DNA Protect Buffer and pH indicator system"). The prevention of fragmentation enables subsequent amplification and analysis of large PCR fragments (see figure "Fast and easy bisulfite conversion"). DNA Protect Buffer also contains a pH indicator dye, allowing confirmation of the correct pH for cytosine conversion. The efficient integrated DNA cleanup allows storage of the converted DNA for at least 12 months without affecting the DNA quality (see figure "Long-term DNA storage").
The EpiTect procedure comprises a few simple steps, based on QIAGEN's straightforward bind, wash, and elute system (see flowchart "Conversion procedure"). After thermal denaturation and sodium bisulfite DNA conversion, the DNA is applied to an EpiTect spin column or plate where, using optimized buffers and a standard microcentrifuge or vacuum manifold, it is washed to remove all traces of sodium bisulfite and eluted. The eluted DNA can be used in all downstream applications, including methylation-specific PCR, real-time PCR analysis, bisulfite sequencing, COBRA, and Pyrosequencing. Accessing epigenetic information is of prime importance for many areas of biological and medical research — particularly oncology, but also stem cell research and developmental biology. However, the analysis of changes in DNA methylation is challenging due to the lack of standardized methods for providing reproducible data, particularly from limited sample material. With its newly introduced EpiTect solutions, QIAGEN makes available standardized, pre-analytical and analytical solutions: from DNA sample collection, stabilization and purification, to bisulfite conversion and real-time or end-point PCR methylation analysis or sequencing (see figure "Standardized workflows in epigenetics").
