Description
Voltage: 100/240 V
Unit Size: Each
The 1160 Zero Air Supply can be configured to operate with or without an internal compressor. If dry air is required, two types of dryers are available; a membrane dryer which will supply the air at a nominal dew point of +5°C or a regenerative or heatless dryer with an output of -40°C. If the internal compressor is chosen, one of these two dryers should also be selected. Key Features:
• Up to three scrubbers in optional materials
• Option of dryer types or no dryer at all
• Available with or without CO and Hydrocarbon reactor
• Temperature alarms for system applications
• 20L per minute supply of airAdditional Information:
• If the removal of CO or Hydrocarbons is desired, a catalytic converter is available and for scrubbing and for most other pollutants chemical scrubbers can be installed
• Optional materials are available for up to three scrubber cartridges*Must be ordered separately. See specification sheet for scrubber options.Ordering Alerts:1. Voltage:
• A = 120VAC, 60Hz
• B = 220-240VAC, 50Hz
• C = 220-240VAC, 50Hz
• D = 240VAC, 60Hz
• J = 100VAC, 50/60Hz2. Compressor:
• N = No Internal Compressor
• H = High Volumetric Flow Compressor3. Air Dryer:
• N = No Internal Dryer (Available with no compressor option only)
• P = +5° C Permeation (Membrane) Dryer
• R = -40° C Regenerative (Heatless) Dryer4. Air Purifiers:
• 1 = Single Stage Scrubber
• 2 = Dual Stage Scrubber
• 3 = Three Stage Scrubber5. CO/VOC Handling:
• N = No Catalytic Converter
• C = Catalytic Converter
