Description
Pressure Range: 6000 to 30,000 psi
Unit Size: Each
Fluke 6531 E-DWT Electronic Deadweight Tester KitsA powerful, complete hydraulic pressure calibration system to cover a wide workloadFluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:• No weights to load and unload, transport or send out for calibration • Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature • No piston-cylinder changes • No significant sensitivity to level or vibration • Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration • Operates in any unit of measure, switching easily from one unit to the next Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.• Pressure ranges available to 200 MPa (30,000 psi) • ± 0.02 % of reading total one-year accuracy, 0.025 % for two years • Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort • Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation • Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 • Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium • AutoTest, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment • Optional foot switch accessory allows hands-free data collection when running AutoTests • Rechargeable battery pack and transport case options for field operationIncludes: • E-DWT-H Electronic Deadweight Tester with power supply and operating manual • Vacuum liquid fill kit • Test station quick-mount fitting • NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in • BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in • Metric adapters: M20 x 1.5 and M14 x 1.5
