Description
Unit Size: Each
Fluke 1587/I400 FC 2-in-1 Insulation Multimeter W/ i400 Current Clamp FC KitKey Features:
• Includes the Fluke 1587 FC 2-in-1 Insulation DMM and the Fluke i400 Current Clamp
• With the Fluke 1587 FC, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease
• Use the Fluke i400 with your Fluke 1587 FC to accurately measure AC current without breaking the circuitThe Fluke 1587 FC 2-in1 Insulation DMM
• Pl/DAR measurements with TrendIt; graphs
• Memory storage through Fluke Connect Measurements app
• Temperature Compensation through Fluke Connect Measurements app
• VFD low-pass filter for accurate motor drive measurements
• Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
• Insulation test voltages 500 V, 1000 V
• Insulation test: 0.01 M? to 2.0 G?
• Insulation test: 0.1 M? to 600 M?
• Auto-discharge of capacitive voltage
• Insulation test smoothing reading
• Frequency / Capacitance / Diode test / Temperature
• Min/Max / AC/DC Voltage / DC Millivolts / AC/DC Milliamps
• Resistance (0.1 ? to 50 M?) / Continuity / Auto power off
• Three-year warranty / Remote probe, test leads, alligator clips, K-type thermocouple, hard caseFluke i400 AC Current Clamp
• Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
• 1 mA/Amp output guarantees easy reading
• CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
• Specially designed to offer maximum utility in a very compact shape
• Maximum conductor: Ø 32 mm
• 1 year warrantyIncludes the 1587 FC 2-in-1 Insulation DMM and the i400 Current ClampThe Fluke 1587 FC Insulation Multimeter features four powerful new diagnostic functions through the Fluke Connect Measurements app:
• Pl/DAR timed ratio tests with TrendIt; graphs identifies moisture and contaminated insulation problems faster
• Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
• Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
• Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect; AssetsThe Fluke i400 AC CurrentClamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.
• Fluke i400 AC Current Clamp
• Specifications
• Nominal current range: 400 A
• Continuous current range: 1 A - 400 A
• Maximum non-destructive current: 1000 A
• Lowest measurable current: 1 A
• Basic accuracy:
• 2% + 0.06 A
• (45-400 Hz)
• (% reading + floorspec)
• Useable frequency: 5 Hz - 20 kHz
• Output level(s): 1 mA/ASafety Specifications:
• Safety: CAT IV 600 V, CAT III, 1000 V
• Maximum voltage: 1000 V AC rms from earth to ground, in compliance with EN61010Mechanical and General Specifications:
• Warranty: 1 year
• Maximum conductor diameter: 32 mm (1.25 in)
• Maximum conductor size (busbar): 750 MCM
• Output cable length: 1.5 m (59 in)
• Shrouded banana plugs: YesIncludes:
• Fluke 1587 FC 2-in-1 Insulation DMM
• Fluke i400 Current Clamp
