Agilent, 5068-0018, Stator screws pack, 10/pk – click part number for model compatibility

The Agilent stator screws pack provides ten replacement fasteners for compatible liquid chromatography injection and switching valve assemblies. Stator screws retain the valve's stator hardware in the correct mechanical position so the stationary fluid passages remain aligned with the rotating sealing surface. Correct installation contributes to controlled flow routing and reduces the risk of leakage caused by uneven seating. These screws are service fasteners, not a complete valve, stator, rotor seal or injector upgrade kit. The same replacement screw identifier appears in maintenance documentation for several Agilent autosampler and thermostatted column compartment valve configurations, but this does not establish universal compatibility across all LC modules. Identify the installed valve and use the instrument-specific parts diagram before selecting these screws. Depressurize the LC fluid path, disconnect power when required and remove the valve components following the service procedure. Tighten the screws evenly to the prescribed torque and sequence, then perform a leak check and verify valve switching and chromatographic reproducibility before returning the system to routine use.