Description
The 7N4-1 antibody reacts with human IFN-α2b and to a lesser extent with IFN-α7. It does not react with IFN-α1 nor IFN-α4. IFN-α2b is one of the three variants of IFN-α2 that have been isolated from human cell lines. IFN-α2b is the variant predominantly produced by human leukocytes. Human IFN-α2b belongs to the IFN-α class of proteins also known as leukocyte interferons. IFN-α comprises a family of related but distinct proteins with molecular weights ranging from 16-27 kDa with antiviral, antiproliferative and immunomodulatory activities. The IFN-α family is composed from as many as 14 different genes. The immunogen used to generate the 7N4-1 hybridoma was E. coli-expressed recombinant human IFN-α2b. This is a neutralizing antibody.
Please refer to chart in Suggested Companion Products section for names and sources of materials used in the following protocol Cell Activation Note: The following procedures need to be performed in the hood using aseptic technique. 1. Isolate fresh human peripheral blood mononuclear cells PBMC from 60ml of fresh blood, and wash 2X with sterile 1 X PBS. Centrifuge the cells at 250 X g for 10 minutes and discard the supernatant. 2. Suspend the cells in complete medium (RPMI [Hyclone, Cat. No. SH30096]supplimented with 1% Pen/Strep, 1% L-glutamine and 10% FBS). Count and adjust the cell concentration to 2-3 million cells/mL. 3. Label two sterile 50-mL conical tubes as "Not Stimulated" and "Stimulated with CPG". Dispense 2 million PBMC to each to each tube (2 million cells/test) 4. Add 5µg of CPG oligodeoxynucleotide per ml of cells to the "Stimulated with CPG" tube. Cap the tube and vortex gently. 5. Incubate both tubes for 2 hours at 37°C. 6. Dilute BD FastImmune™ Brefeldin A (BFA)(Cat. No. 347688) 1 to 10 in sterile 1 X PBS. 7. Add 20µl of 1X BFA per mL to both tubes (stimulated and unstimulated). Incubate tubes at 37°C for 2 hours. Note: Keep both CPG and BFA aliquots at -20°C. 8. Add 100µl of 20 mM EDTA per mL of cells to both tubes and incubate overnight at 4°C. Surface and Intracellular Staining 9. Centrifuge the two tubes at 250 X g for 10 minutes. Discard the supernatants by aspiration and re-suspend cells in 25 mL of BD Pharmigen™ Stain Buffer (Cat. No. 554656/554657). 10. Centrifuge the tubes at 250 X g for 10 minutes. Discard the supernatants and re-suspend cells in 2 mL of Stain Buffer. 11. Label 12x75mm polypropylene tubes appropriately. Add 100µl of cells to each tube. 12. Add surface staining antibodies to each tube (FITC Anti-Human Lin-1 cocktail [Cat. No. 340546], PerCP-Cy™5.5 Mouse anti-Human CD123 [Cat. No. 558714/560904], and PE Mouse Anti-Human HLA-DR [Cat. No. 555561] or PE conjugate). Incubate the tubes at room temperature for 30 minutes in the dark. 13. Following incubation, add 2 mL of cold Stain Buffer to each tube and centrifuge at 250 X g for 10 minutes. Discard the supernatants by aspiration and vortex the pellets to re-suspend the cells. 14. Add 1 mL of room temperature BD Cytofix/Cytoperm™ Buffer (Cat. No. 554722) to each tube. Mix well and incubate at room temperature in the dark for 30 minutes. 15. Add 2 mL of cold BD Perm/Wash™ Buffer (Cat. No. 554723) to each tube and centrifuge at 500 X g for 5 minutes; discard the supernatants by aspiration and vortex the pellets to re-suspend cells. 16. Add intracellular staining antibody anti-human IFN-alpha (20µl/test) or the proper isotype control at the appropriate volume per test to the tubes and mix well by vortexing. Bring test volume to 100µl using cold BD Perm/Wash Buffer. Incubate tubes at room temperature for 60 minutes in the dark. 17. Add 2 mL of cold BD Perm/Wash Buffer to each tube and centrifuge at 500 X g for 5 minutes; discard supernatant by aspiration and vortex pellet to suspend cells. 18. Add 300µl of cold BD Perm/Wash Buffer to each tube for immediate flow cytometric analysis. Optional: Re-suspend the pellets with 200 µl of cold 1% -formaldehyde and keep the tubes at 4°C in the dark up to 24 hours before flow cytometry. If storing longer than 24 hours, we recommend washing cells in wash buffer as extended incubation with fixatives might affect fluorochromes. Flow Cytometry and Data Analysis Acquire at least 500,000 events (lymphocytes and monocytes). A sequential gating strategy is required for successful data analysis: 1. Gate tightly on the lymphocytes and monocytes using scatter profiles. 2. View the Lin-1 versus HLA-DR profile of the gated lymphocytes and monocytes, and select the Lin-1-negative, HLA-DR-positive population (R2 in the figure). Be sure not to include any of the Lin-1-positive cells. 3. View the IFN- versus CD123 profile of the gated cells to detect the IFN- -positive population. Unstimulated sample is used as a negative control could also be used to set the markers. Open up the second gate on Lin-1- HLA-DR+(R2) and from there open up the third gate for CD123+ IFN-alpha+(R3). Acquire about 150-200 events in CD123+ IFN-alpha+ double positive quadrant (R3). See below for correct and incorrect gating examples. The proper gating for IFN-alpha is crucial for proper analysis. Below are two examples. The first example is how we recommend gating for proper detection of IFN-alpha. The second example is the incorrect way to gate for IFN-alpha.
Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze. The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated to Alexa Fluor® 647 under optimum conditions, and unreacted Alexa Fluor® 647 was removed.
1. This reagent has been pre-diluted for use at the recommended Volume per Test. We typically use 1 × 10^6 cells in a 100-µl experimental sample (a test).
2. An isotype control should be used at the same concentration as the antibody of interest.
3. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
4. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
5. The Alexa Fluor®, Pacific Blue™, and Cascade Blue® dye antibody conjugates in this product are sold under license from Molecular Probes, Inc. for research use only, excluding use in combination with microarrays, or as analyte specific reagents. The Alexa Fluor® dyes (except for Alexa Fluor® 430), Pacific Blue™ dye, and Cascade Blue® dye are covered by pending and issued patents.
6. Alexa Fluor® 647 fluorochrome emission is collected at the same instrument settings as for allophycocyanin (APC).
7. For fluorochrome spectra and suitable instrument settings, please refer to our Multicolor Flow Cytometry web page at www.bdbiosciences.com/colors.
8. Alexa Fluor® is a registered trademark of Molecular Probes, Inc., Eugene, OR.
9. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
