Merck, 28520-U, ATIS Adsorbent Tube Injector System 110V

General description
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected by a syringe through a replaceable septum in the center of the injection glassware, which is heated.
Features and Benefits

• Injecting calibration standards onto adsorbent tubes, to calibrate your analytical system
• Injecting surrogates and system monitoring compounds onto adsorbent tubes before or after sampling
• Removes moisture from tubes prior to analysis (Dry purging)
• Connect an air-sampling bag to the outlet of the ATIS to vaporize a calibration standards prior to assure complete

vaporization.
The ATIS will accept either 1/4 in. or 6mm O.D. Thermal Desorption tubes. Included is a Luer/Hose Barb adapters to connect a variety of solvent desorption tubes. The temperature range of the ATIS is ambient to 120°C. The
flow range is 0 to 100mL/min. The ATIS includes the injection glassware, a constant flow controller with a on/off valve, the heating source, spare parts along with all the necessary fittings and tubing. You simply plumb it to a regulated source of nitrogen or helium and plug it in to the appropriate electrical source.