Description
General description
This water purification kit contains Millipak® 100 Bacteria Filter (MPGL10ZW1) and Progard® 3 Pretreatment Pack (PR0G00003).
Millipak® filter removes bacteria from pure water before it enters the analyzer.
The Progard® Pack pretreats water by removing large particles, organic compounds and free chlorine from tap water.
Application
The filter provides water suitable for laboratory use, including clinical analyzers, with the removal of bacteria and particulates.
The pretreatment pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Features and Benefits
Millipak® 100 filter features:
0.22 μm Durapore® filter membrane for bacteria removal.
Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.
Progard® 3 Pretreatment Pack features:
Polyphosphate for anti-scaling protection.
Silver-impregnated activated carbon filter for free chlorine and organics reduction.
Depth-filtration (0.5 μm) for removal of particles and colloids.
Other Notes
Directions for Use
Organism Retention: Microorganisms
Mode of Action: Filtering
Application: General laboratory analysis
Intended Use: Water purification
Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
Storage Statement: Store in a dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
