Merck, KHVES10TH1, Opticap® XL 10 CapsuleMedia: Sterile Millipore Express® SHR w/Prefilter 0.5 / 0.1 µm

Name: Opticap® XL 10 CapsuleMedia: Sterile Millipore Express® SHR w/Prefilter 0.5 / 0.1 µm
Brand: Merck
SKU: KHVES10TH1

Size:1 pkg, Millipore Express® SHRP, Opticap® XL Capsule, Chemistry: Hydrophilic Polyethersulfone (PES)Inlet: 1-1/2 in. Sanitary FlangeOutlet: 9/16 in. Hose BarbMax Operating Pressure: 80 psi @ 25 °C

Catalog Number: KHVES10TH1

Pricing

Send an RFQ.

View RFQ List

Category

Vacuum Filtration Units

TagsFiltration Filtration for Bioprocessing Media Filtration filters for bioprocessing

CollectionsMerck Cell Culture Supplements & Reagents: Complete Solutions for Research & Bioproduction Merck Roche Life Science Products for PCR, RT‑PCR & Nucleic Acid Purification

Description

General description Device Configuration: Capsule Packaging Double Easy-Open bag Preparation Note Sterilization Method: 3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable This product was manufactured with a MILLIPORE EXPRESS® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). Analysis Note Bacterial Retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 107 CFU/cm2 using ASTM® F838 methodology. TOC/Conductivity: After sterilization and a controlled water flush of 20 L, samples exhibited Other Notes Directions for Use: Organism Retention: Microorganism Mode of Action: Filtration (size exclusion) Application: BioProcessing Intended Use: Reduction or removal of microorganism/bioburden Instructions for Use: Please refer installation section of OPTICAP® XL Capsules and OPTICAP® XLT Capsules user guide Storage Statement: Store in dry location Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations Legal Information ASTM is a registered trademark of American Society for Testing and Materials MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Specifications

General

UNSPSC Code	23151806
Web Name Suffix Override	Fittings 1-1/2 in. TC- 9/16 in. HB, Sterile
Web Name Override	Millipore Express® SHR with prefilter 0.5/0.1µm, Opticap® XL 10 Capsule
material	polyester support
reg. compliance	meets FDA 21 CFR 177-182 (all component materials)
sterility	irradiated
Quality Level	400
product line	Opticap® XL 10
feature	hydrophilic
manufacturer/tradename	Millipore Express®
parameter	≤30.4 mL/min air diffusion at 3.45 bar (50 psig) (in water)
technique(s)	sterile filtration: suitable
cartridge nominal length	10 in. (25 cm)
device L	33.5 cm (13.2 in.)
device size	10 in.
filter diam.	14.5 cm (5.7 in.)
filter filtration area	0.54 m2
impurities	≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
matrix	Millipore Express® SHR (w/Prefilter)
pore size	0.5/0.1 μm pore size
bubble point	≥2586 mbar (37.5 psig), nitrogen with 70/30% IPA/water

Ordering

Notice

Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:

[email protected]

Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.