Description
General description
The compact Milliflex Oasis® VHP resistant pump streamlines filtration steps during testing to accelerate and ease the sample preparation. When used with convenient Milliflex Oasis® filtration funnels, the pump and Milliflex Oasis® units comprise an integrated solution for delivering reliable and accurate results. The pump′s small footprint suits tight workspaces and its low profile allow easy access and usage in isolators. The housing and the external parts are VHP resistant.
Application
The Milliflex Oasis® VHP resistant pump is designed to perform filtrations of samples inside an isolator. It is suitable for rapid sterility testing in combination with the Milliflex® Rapid System 2.0.
Biochem/physiol Actions
Frame Stainless steel316 L
Filtration heads Two per pump, Stainless steel, silicone, rubbergasketsNote: The pump head including all its components can be autoclaved at 121 °C for 15 minutes OR at 134 °C for 5 minutes.
Pump dimensions
Height 90 mm (3.5in.)
Width 230 mm (9.0in.)
Depth 310 mm (12.2in.)
Filtration support height 70 mm (2.8 in.)
Weight with filtration heads 3.4 kg (7.5 lb)
Power supply 100V–240V;50/60Hz — One set can be used for up to two pumps
Features and Benefits
Streamlines filtration steps
Compatible with the isolator environment and VHP decontamination
Compatible with the Milliflex® Rapid System 2.0 to perform rapid sterility testing in a clean environment (isolator)
Other Notes
Easy set-up
Quick connections for power and drain tubing
No calibration needed
Ergonomics
Low height - 90 mm (3.5 in.)
Cross-contamination prevention
Check valve situated in the removable filtration head prevents potential contamination
Accessible key parts of the head for easy cleaning
High throughput
Scalability: Connect up to 2 pumps and start up to 4 simultaneous filtrations with a single push of the button
Legal Information
MILLIFLEX is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIFLEX OASIS is a registered trademark of Merck KGaA, Darmstadt, Germany
