Thermo Fisher, 060001, Dionex™ NGES Next Generation Electrolytic Suppressor

Name: Dionex™ NGES Next Generation Electrolytic Suppressor
Brand: Thermo Fisher
SKU: 060001

Capacity: 200 μeq/min, For Use With (Application): Anion analysis, Diameter: 4 mm, Unit Size: Each, Meet the growing demands of ion chromatography (IC) with the Dionex NGES electrolytic suppressor. Housed in new hardware, this suppressor is designed for IC applications requiring high capacity, low noise, high backpressure resiliency, and fast startup. The Dionex NGES electrolytic suppressor is available in 2 mm and 4 mm formats.

Catalog Number: 060001

Pricing

Send an RFQ.

View RFQ List

Category

Suppressors

TagsChromatography Systems Ion Chromatography Instruments Ion Chromatography Components and Accessories General IC Accessories

CollectionsThermo Fisher Chromatography Systems: HPLC/UHPLC, IC & GC Solutions Thermo Fisher Clinical Analyzers & Instruments for Diagnostic Labs Thermo Fisher General Lab Supplies for Daily Workflows — Nalgene, Nunc, Samco & Matrix

Description

Capacity: 200 μeq/min
For Use With (Application): Anion analysis
Diameter: 4 mm
Unit Size: Each
Meet growing IC application demands with the Dionex NGES electrolytic suppressor
• Full electrolytic regeneration without reagents
• Sustains accurate results with exceptional peak resolution
• Improved backpressure resilience, making it compatible with a wide range of post-suppressor devices and detectors, such as mass spectrometers The Dionex NGES electrolytic suppressor is the recommended replacement for the Thermo Scientific™ Dionex™ DRS™ 600 Dynamically Regenerated Suppressor and the Thermo Scientific™ Dionex™ ERS™ 500 Electrolytically Regenerated Suppressor. Software compatibility information The Dionex NGES Suppressor requires a minimum version of the Thermo Scientific™ Chromeleon™ Chromatography Data System (CDS) to be recognized as “NGES” in the software. Please refer to the Dionex NGES Suppressor Manual or Installation Guide for the required minimum version for recognition and operation of a Dionex NGES Suppressor with your system. If your instrument is not using the required version of Chromeleon CDS or higher, please contact your local Thermo Fisher Scientific representative for additional assistance.

Specifications

General

Capacity	200 μeq/min
Diameter	4 mm
Dimensions (D x W x H)	4.5 x 10.7 x 4.7 cm
Flow Rate	3 mL/min max
For Use With (Application)	Anion analysis
For Use With (Equipment)	Dionex ion chromatography systems
Operation	Recycle mode
Pressure	500 psi backpressure max
Solvents	Hydroxide, carbonate/bicarbonate eluents, and borate eluents
Temperature Range	15 to 50 °C
Void Volume	< 50 μL
Weight (English)	1.01 lb
Weight (Metric)	460 g
Type	Suppressor
Unit Size	Each

FAQs

Question: What application is this suppressor configured for?

Answer:This version is configured for anion analysis.

Question: What capacity and diameter are specified?

Answer:The suppressor is rated at 200 µeq/min in a 4 mm format.

Question: Does it require chemical regenerant?

Answer:No. The NGES device uses electrolytic regeneration.

Application Note

Dionex™ NGES Next Generation Electrolytic Suppressor is an electrolytically regenerated suppressor for ion chromatography. This configuration is the 4 mm anion-analysis version with a capacity of 200 µeq/min. It is designed for high-capacity, low-noise operation and is particularly suited to modern 4 µm IC columns. The suppressor supports hydroxide, carbonate/bicarbonate, and borate eluents and can operate in recycle mode or external-water mode. Maximum flow rate is 3 mL/min, maximum post-suppressor backpressure is 500 psi, and the operating temperature range is approximately 15–50 °C. Full electrolytic regeneration eliminates the need to prepare and handle chemical regenerant solutions during routine suppressed-conductivity analysis.

Ordering

Notice

Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:

[email protected]

Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.