Description
Description: Model EPM. 300 Diluting Stack Sampler
Unit Size: Each
The system uses an air-driven aspirator which extracts the sample from the stack. It is then passed consecutively through a coarse and fine particulate filter, a preselected glass or quartz critical orifice and diluted with the air from the aspirator. This process reduces the dew point of the stack sample to below that of the ambient air. Key Features:
• Low-cost installation, maintenance and operation
• Low extractive flow rates, promoting long filter life
• No moving parts in the system
• Easy dynamic in-situ calibration at total dilution system
• Manual or optional automatic blow back
• Optional probe heater Additional Information:
• No need for heated sample line in most cases
• Diluted sample is transported at positive pressure
• Any existing ambient air analyzer can be used
• Available in several corrosion resistant materials Ordering Alerts: Available in several corrosion-resistant materials. EPM.302 In-Situ Dilution Probe - Flanged (EPM.302- __ __) Material of Wetted Parts
• L = Stainless Steel
• I = Inconel
• H = Hastelloy
• C = Halar Coated Inconel Flange Mounting Included
• B = Bored
• T = Threaded (Available in Inconel only) Orifice Flow Rate Selection (Dilution Ratio) Included
• A = 20 mil (215:1 to 350:1) Glass [2126.064]
• B = 50 mil (95:1 to 150:1) Glass [2126.047]
• C = 100 mil (44:1 to 75:1) Glass [2126.044]
• D = 150 mil (32:1 to 50:1) Glass [2126.045]
• E = 200 mil (27:1 to 37:1) Glass [2126.046]
• F = 250 mil (20:1 to 30:1) Glass [2126.048]
• G = 500 mil (12:1 to 16:1) Glass [2126.049] * Please consult factory for other dilution ratios or Orifice selections EPM.303 In-Situ Dilution Probe - Threaded (EPM.303- __ __) Material of Wetted Parts
• I = Inconel
• H = Hastelloy
• C = Halar Coated Inconel Orifice Flow Rate Selection (Dilution Ratio) Included
• A = 20 mil (215:1 to 350:1) Glass [2126.064]
• B = 50 mil (95:1 to 150:1) Glass [2126.047]
• C = 100 mil (44:1 to 75:1) Glass [2126.044]
• D = 150 mil (32:1 to 50:1) Glass [2126.045]
• E = 200 mil (27:1 to 37:1) Glass [2126.046]
• F = 250 mil (20:1 to 30:1) Glass [2126.048]
• G = 500 mil (12:1 to 16:1) Glass [2126.049] * Please consult factory for other dilution ratios or Orifice selections EPM.305 In-Situ Dilution Probe - Flanged (EPM.305- __ __) Material of Wetted Parts
• I = Inconel
• H = Hastelloy Orifice Flow Rate Selection (Dilution Ratio) Included
• C = 100 mil (44:1 to 75:1) Quartz [2126.057]
• D = 150 mil (32:1 to 50:1) Quartz [2126.058]
• E = 200 mil (27:1 to 37:1) Quartz [2126.059]
• F = 250 mil (20:1 to 30:1) Quartz [2126.060]
• G = 500 mil (12:1 to 16:1) Quartz [2126.061] * Please consult factory for other dilution ratios or Orifice selections EPM.306 In-Situ Dilution Probe - Threaded (EPM.306- __ __) Material of Wetted Parts
• I = Inconel
• H = Hastelloy Orifice Flow Rate Selection (Dilution Ratio) Included
• C = 100 mil (44:1 to 75:1) Quartz [2126.057]
• D = 150 mil (32:1 to 50:1) Quartz [2126.058]
• E = 200 mil (27:1 to 37:1) Quartz [2126.059]
• F =0 250 mil (20:1 to 30:1) Quartz [2126.060]
• G = 500 mil (12:1 to 16:1) Quartz [2126.061] * Please consult factory for other dilution ratios or Orifice selections Recommended for:
• Can be used in explosion-proof areas
• Can be used with any existing ambient air analyzer
