Tosoh, 0016051, TSKgel Ether-5PW (30)

TSKgel Ether-5PW (30) resin is a hydrophobic interaction chromatography resin for biomolecule purification. The resin is composed of a base material of hydroxylated methacrylic polymer beads that have been functionalized with an ether ligand group. TSKgel Ether-5PW (30) is less hydrophobic than the Phenyl-5PW resins and is the best choice for the separation of very hydrophobic proteins or monoclonal antibodies. This resin has a 100 nm pore size and a 30 µm bead size. TSKgel Ether-5PW (30) resin has a high chemical and mechanical stability, allowing cleaning-in-place (CIP) and high flow rates. TSKgel PW resins vary from Tosoh’s TOYOPEARL resins by having a higher degree of crosslinking which is necessitated by the higher flow pressures needed when using smaller particles for chromatography. The increased level of crosslinking decreases the number of sites available for ligand immobilization when producing TSKgel PW hydrophobic interaction chromatography resins. A TSKgel PW resin will have a lower dynamic binding capacity than the corresponding TOYOPEARL material, however; chromatographic efficiency, peak width, and resolution are improved because of their smaller particle sizes. In this way they are higher performing chromatography resins than their TOYOPEARL counterparts. TSKgel Ether-5PW (30) resin is best used for high resolution process polishing steps. If a product with less resolution is needed, the larger particle TSKgel Ether-5PW (30) or TOYOPEARL Ether-650 resins may be used. If higher resolution is required, the TSKgel Ether-5PW (20) should be used. Because similarly functionalized TSKgel PW and TOYOPEARL resin types have the same backbone polymer chemistry, the selectivity for proteins and impurities remains the same.