Description
Key facts
Tags:Tag free,
Biologically active:No,
Conjugation:20nm Gold,
Animal free:No,
Carrier free:No,
Storage buffer:pH: 7Constituents: Tris buffered saline, 0.1% Sorbitan monolaurate, ethoxylated
Product details:
Protein A Gold Conjugate (20nm, 10 OD) (ab270601) is manufactured using our Gold Nanoparticles which have a protective coating that can withstand the most extreme conditions (e.g. 2.5 M NaOH at 70°C for >1 hour). The irreversible covalent attachment does not allow the desorption of the Protein A, which is a major problem associated with gold conjugates when developed using passive adsorption techniques.
To exchange the conjugate into a specific buffer for your assay or test, centrifuge the conjugate in a microfuge at 9,000 x
for 20 minutes. Carefully remove the supernatant and add your preferred buffer. It is important to avoid substances that have a very high affinity for gold (e.g. thiols).
The maximum absorbance for Protein A Gold Conjugate (20nm, 10 OD) is at 528 nm. To determine the effective concentration of the conjugate obtained we advise to measure the Absmax of light using an UV-vis spectrophotometer after diluting your sample to an appropriate range for your piece of equipment (e.g. if a 40 nm gold conjugate is at 10 OD and is diluted 1:10 the Abs530nm for a 1 cm light path is expected to be around 1 AU).
Before using Protein A Gold Conjugate (20nm, 10 OD) to detect a specific antibody we recommend that you check the affinity of Protein A for that antibody and subtype (see table below). Rabbit and human IgGs, for example, are good candidates because they bind to Protein A with high affinity.
Species
Binding Strength
Rabbit
Low/Medium
Low/Medium
Protein A Gold Conjugate (20nm, 10 OD) is tested as a detector tool in Lateral Flow Assay but can also be used in electron and light microscopy, immunoblotting, and dot-blot. As Protein A Gold Conjugate (20nm, 10 OD) affinity for antibodies can vary, a titration of the specific antibody used is recommended in order to obtain the optimal performance. We recommend performing the incubation of Protein A Gold Conjugate (20nm, 10 OD)) with the antibody in a buffer that has a pH close to 8, for at least 10-15 minutes. After this stage do not centrifuge the gold complex.
This product is manufactured by Expedeon, an Abcam company. It was previously called 20nm InnovaCoat
GOLD (10 OD) Protein A Conjugate. Expedeon product code 224-0200 is the same as the 200 μl size of this product and code 224-1000 is the same as the 1 mL size.
Properties and Storage Information:
Shipped at conditions-Ambient - Cannot Ship with Ice, Appropriate short-term storage conditions-+4°C, Appropriate long-term storage conditions-+4°C
