Biolegend, 480205, Cell-Vive™ GMP MojoSort™ Human CD56 Nanobeads
100tests
Catalog Number: 480205
Send an RFQ.
Category
Loading…
| Reactivity | Human |
|---|---|
| Formulation | Particle: Aqueous solution containing 0.3% recombinant HSA |
| Endotoxin Level | < 0.1 EU/Test (< 10 EU/mL) |
| Capacity | Based on in-house testing, process up to the following total cells per kit: Handheld Magnet Column-Based Cat# 480204 1x108 6.5x108 Cat# 480205 1x109 6.5x109 Note: Each commercially available magnetic cell separation system has a different maximum labeled cell number that can be processed in a single reaction. To avoid overloading or clogging, confirm the system capacity. If additional cells are needed, consider running multiple separation reactions and pooling target fractions to reach desired cell recovery. |
| Preparation | Serum-free recombinant antibody was purified by affinity chromatography and conjugated with magnetic nanobeads under optimized conditions in a GMP facility. Contains no preservatives. |
| Storage & Handling | Undiluted at 4°C (2°C-8°C) |
| Application | Cell Sep - Pos |
| Recommended Usage | 10 µL of Human CD56 Nanobeads for 1 x 107 PBMCs in 100 µL separation buffer Nanobead dilution to use in column: 6.5x |
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| Application Notes |
|---|
| This kit is optimized for the positive selection or depletion of CD56+ cells from human peripheral blood mononuclear cells (PBMCs). Alternate sources of cell suspensions may require protocol optimization. Recommended protocol for positive selection or depletion of CD56+ cells from human PBMCs Use sterile consumables and work in a biosafety cabinet. To maintain cell viability and reduce non-specific binding, work quickly, keep cells cold, and use pre-chilled separation buffer kept on ice throughout the procedure. Isolate PBMCs using density gradient centrifugation. If working with another tissue, prepare a single cell suspension according to standard protocols. Excess dead or red blood cells may increase non-specific binding and removal prior to separation may increase performance. Filter the cell suspension with a sterile 40 µm nylon cell strainer for optimal performance. Separator Protocol This procedure is optimized at 1 x 107 cells/test. When working with more cells, optimize the conditions to your specific cell number and tissue for best results. Resuspend cells at 1 x 108 cells/mL with Cell-Vive™ CD Cell Separation Buffer, GMP (Cat# 420512) or other commercially available separation buffer. Aliquot 100 µL (107 cells) into appropriate tube. Optional: Reserve an aliquot of unseparated cells as a control. Scale up to 2 mL (2 x 108 cells) in 12 x 75 mm (5 mL) polypropylene tube for 5 mL magnet (Cat# 480019). Scale up to 10 mL (1 x 109 cells) in 17 x 100 mm (14 mL) polypropylene tube for 14 mL magnet (Cat# 480020). Resuspend the antibody-conjugated nanobeads well by vortexing at maximum speed, at least 5 touches. Add 10 µL of conjugated nanobeads per 107 cells. Immediately, mix well to fully incorporate, and incubate on ice for 15 minutes. Optional: Washing cells to remove unbound nanobeads may improve purity but reduce yield. Use separation buffer, gently mix and centrifuge the cell suspension at 300xg for 5 minutes and discard supernatant. Add separation buffer, up to indicated volume. Mix well by pipetting to fully incorporate. 3.5 mL for separating ≤ 2 x 108 cells using the 5 mL magnet. 5 mL for separating ≤ 5 x 108 cells, or 10 mL for separating 5 x 108 - 1 x 109 cells, using the 14 mL magnet. Place the tube in the MojoSort™ magnet to perform separation. 5 minutes separation time for 5 mL magnet. 10 minutes separation time for 14 mL magnet. Carefully, pour out the unlabeled fraction into a collection tube. If these are your cells of interest, do not discard. Remove tube containing magnetically labeled fraction from the magnet, do not discard. Repeat steps 4-6 on the magnetically labeled fraction for a total of 3 separations for optimal purity. Pool the unlabeled negative fractions and keep the labeled cells for downstream applications. The fraction that is not of interest may be useful as staining controls, to monitor purity/yield, or other purposes. Column Protocol Prepare antibody-conjugated nanobeads at dilution recommended for column use found on the TDS. Vortex nanobeads well at maximum speed to resuspend before diluting with Cell-Vive™ CD Cell Separation Buffer, GMP (Cat# 420512) or other commercially available separation buffer. Cat# 480204/480205 recomended nanobead dilution to use on columns: 6.5x There are several types of commercially available columns, depending on your application. Choose the one that best fits your experiment. Column cell capacity is dependent on column volume, target cell abundance, type, and size. Protocol and bead dilution should be optimized empirically for use on different column systems. Resuspend cells at 1 x 108 cells/mL with separation buffer. Optional: Filter cell suspension through a 40 µm filter before addition to column for best results. Aliquot 100 µL (107 cells) into appropriate tube. Optional: Reserve an aliquot of unseparated cells as a control. Note: Scale up volumes for larger cell numbers dependent on column capacity. For example, add 100 µL nanobeads for 1 x 108 cells (equivalent to 10 tests at 1 x 107 cells/test) in 1 mL separation buffer. Resuspend the diluted antibody-conjugated nanobeads well by vortexing at maximum speed, at least 5 touches. Add 10 µL of conjugated nanobeads per 107 cells. Immediately, mix well to fully incorporate, and incubate on ice for 15 minutes. Wash the sample with separation buffer and gently mixing. Centrifuge the cell suspension at 300xg for 5 minutes and discard the supernatant. Resuspend well in 1 mL of separation buffer by pipetting and place on ice. Note: We recommend a maximum cell density of 1 x 108 million cells/mL of buffer (equivalent to 10 tests/mL of buffer) for column loading. A lower cell density may improve recovery. User may need to optimize cell loading density. If working with larger cell sample volumes, sample may need to be loaded in multiple smaller volumes to avoid overloading the column or on multiple columns and pooled after separation. Prepare the column by placing in the appropriate corresponding magnetic separator and rinsing with 3 mL separation buffer. Discard the flow through. Place an appropriate tube below the column to collect the negative fraction. Add the labeled cell suspension to the column and collect the fraction containing the unlabeled cells. Optional: Filter cell suspension through a sterile 40 µm filter before addition to column. Wash the column 3 times with 3 mL of separation buffer and collect the flow-through containing the unlabeled cells. Wait until the previous buffer has drained from the reservoir before proceeding to the next wash but avoid letting the column run dry. The negative fraction flow-through may be useful as controls, to monitor purity/yield, or other purposes. Remove the column from the magnet and place in a collection tube. Allow the column to demagnetize fro 1-2 minutes. Add 5 mL separation buffer to the column reservoir and flush the magnetically labeled fraction into the collection tube with a plunger or supplied device. This contains the magnetically labeled cells; do not discard. |
| Disclaimer | BioLegend Cell-Vive™ GMP MojoSort™ cell separation tools are for research use only. Suitable for ex vivo cell processing use. Not for use in diagnostic or therapeutic use. Not for resale. BioLegend will not be held responsible for patent infringement or other violations that may occur with the use of our products. |
|---|
| Gene ID | NA |
|---|
| UniProt | View information about CD56 on UniProt.org |
|---|
