Description
Permeate performance: 40 L/hr.
Unit Size: Each
Microprocessor control has digital conductivity measurement of feedwater and permeate, as well as individual limiting value monitoring of the permeate. The system also displays operating and fault messages, has an automatic quality rinse, potential-free contact and RS-232 connector for printer output.Technical benefits at a glance
• Capacity is 60-120L/hr and is expandable
• At least 75% yield of high purity water
• 99% reduction in salts, bacteria, particles and pyrogens
• Soft start for membrane protection
• Automatic rinsing cycles
• Low cost doubling of capacity on increased need for high purity water
• Feed water is potable water
• Housing is a cabinet
• System is not to be wall mounted
• Pretreatment - carbon prefilter and hardness stabilizer standard
• Digital conductivity of feed and permeate
• Display shows errors
• Flow meter not included
• RS232 standard
• Storage tank is included with a pressure pumpEfficient performance, economical running
• For supplying autoclaves, washing machines and automatic analyzers when the tap water has a high salt content
• When ion exchanger regeneration costs are high
• When reliable handling of the regeneration process cannot be ensured
• When greater-than150L of high purity water are required daily
• When removal of a high percentage of bacteria, particle and pyrogen is required
• When a constant water quality is a necessity
• As central purified water system in buildingsDependable high purity water qualityThermo Scientific reverse osmosis (RO) membranes are not only extremely effective in removing salts, but also more than 99% effective in removing incoming bacteria, particles and pyrogens.The quality rinse is a completely automatic rinsing cycle with permeate discard before and after use, as well as when not in use, to ensure constant high purity water quality.More water needed? No problem.Should your high purity water requirement increase (e.g. because of the purchase of additional glassware washers), then your system can be retrofitted to double its capacity without changing its dimensions!Saves space and cuts costsA central water treatment system replaces numerous individual systems and so not only saves space but also eliminates costs for ion exchanger regeneration etc.Compact but with room for moreReady-to-connect systems are available for mounting on a wall or as systems completely contained in a dust-protective and noise reducing cabinet. Integrated pretreatment reduces loss in performance, e.g. due to suspended matter and precipitates of mineral salts or hardness formers, can easily be integrated inside the modular system cabinet.Downstream treatment measures, e.g. sterile filtration, UV disinfection and tanks, can also be mostly fitted in, according to their size.Ordering Information:This product is not available in all regions
