Description
Permeate performance: 800 L/hr.
Unit Size: Each
Technical benefits at a glance
• Capacity is 500 -1100L/hr. and is expandable
• At least 75% yield of high purity water
• 99% reduction in salts, bacteria, particles and pyrogens
• Automatic rinsing cycles
• Low cost doubling of capacity on increased need for high purity water
• Feed water is softened potable water
• Housing is a stainless steel frame
• System is not to be wall mounted
• Pretreatment - carbon prefilter
• Digital conductivity of feed and permeate
• Display shows errors
• Flow meter included
• RS232 optional
• Storage tank is not included but required High purity water for exceptional cases The quality of the high purity water supplied by a reverse osmosis membrane is not sufficient when a conductivity below 1μS/cm is required. For such cases, a combination of reverse osmosis with downstream electrodionization (EDI) is needed. Results from routine usage show that such a combination with EDI technology allows product water of less than 0.1μS/cm to be obtained from 600μS/cm raw water. In addition, the continual self-regeneration of the high purity EDI mixed bed resins effects a very high microbiological purity of the water produced. Efficient performance, economical running
• For supplying autoclaves, washing machines and automatic analyzers when the tap water has a high salt content
• When ion exchanger regeneration costs are high
• When reliable handling of the regeneration process cannot be ensured
• When greater-than150L of high purity water are required daily
• When removal of a high percentage of bacteria, particle and pyrogen is required
• When a constant water quality is a necessity
• As central purified water system in buildings Dependable high purity water quality Thermo Scientific Barnstead reverse osmosis (RO) membranes are not only extremely effective in removing salts, but also more than 99% effective in removing incoming bacteria, particles and pyrogens. The quality rinse is a completely automatic rinsing cycle with permeate discard before and after use, as well as when not in use, to ensure constant high purity water quality. More water needed? No problem. Should your high purity water requirement increase (e.g. because of the purchase of additional glassware washers), then your system can be retrofitted to double its capacity without changing its dimensions! Saves space and cuts costs A central water treatment system replaces numerous individual systems and so not only saves space but also eliminates costs for ion exchanger regeneration etc. Compact but with room for more Ready-to-connect systems are available for mounting on a wall. Integrated pretreatment reduces loss in performance, e.g. due to suspended matter and precipitates of mineral salts or hardness formers, can easily be integrated inside the modular system cabinet. Downstream treatment measures, e.g. sterile filtration, UV disinfection and tanks, can also be mostly fitted in, according to their size. Ordering Information: This product is not available in all regions
