Description
Capacity (Metric): 85 L
Includes: 2 x PT100 Temp Probe
Unit Size: Each
• Fast Liquid CoolingAfter sterilization is completed, compressed air is passed through a microbiological filter into the autoclave chamber in order to prevent a drop in pressure which also prevents load deformation, cracks or spills. Cold water is then circulated through cooling pipes that rapidly reduces the chamber temperature and that of the liquid load to a safe temperature. Tuttnauer’s fast liquid cooling technology reduces cycle time by as much as 75% and minimizes load exposure to high temperatures.
• Super Fast Liquid CoolingIn addition to fast cooling, an optional fan can be applied to further circulate the compressed air in the chamber. This speeds up the heat exchange during the cooling stage in order to safely achieve super fast cooling of the liquid load under pressure. Tuttnauer’s accelerated fast liquid cooling technology reduces cycle time by as much as 90% and minimizes load exposure to high temperatures.
• F0 – Protect Your Liquid Media, Save Time, Save EnergyAn additional challenge with liquid sterilization is the need to prevent extended exposure of liquid media to high temperatures which may harm the quality of the liquid media. The advanced F0 optional feature assists in minimizing the time liquids are exposed to high temperatures during sterilization thereby protecting liquid media, saving your laboratory time and reducing energy consumption.
• Fast and Efficient Heat-upVertical and Benchtop laboratory autoclaves with built-in steam generators provide fast & efficient heat-up and complete drying.
• Efficient Air RemovalAn optional vacuum pump can be used for fractioned pre vacuum air removal eliminating air pockets from all load types and maximizing efficient steam penetration throughout the entire load.
• Active Drying with Post VacuumFor benchtop autoclaves, an optional vacuum pump can be used for post vacuum drying, at the end of the sterilization cycle, ensuring improved drying of porous loads and hollow instruments such as pipette tips. The benchtop autoclave is equipped with a heating plate attached under the chamber that heats the chamber during the drying phase. The low pressure in the autoclave chamber, caused by the vacuum, reduces the boiling temperature forcing moisture to evaporate rapidly. The vapour is then removed from the chamber by vacuum resulting in a dry load.
• R.PC.R SoftwareAutomatic Recording of Cycle Information to Your PCReporting You Can Rely OnRemote PC Reporting (optional PC software)Automatic recording of cycle information to any PC on your networkConvenient access to graphs and tables that are easy to understandEasily generate PDF reportsNo need to file printouts, saving you timeBe in Control with Real-Time Remote MonitoringSee the real-time autoclave display on your PCMonitor all activity for up to 8 autoclaves
• Advanced Control System for Your LaboratoryTake Advantage of Tuttnauer’s state-of-the-art Control System with Multi-Color Display. Features:Fo software controlPID (Proportional Integral Differential) pressure controlStores the last 200 cycles in built-in memoryTwo independent flexible PT100 temperature sensors to prevent over-boiling of liquids and explosions of bottlesUp to 6 temperature sensors and 4 pressure sensors can be connected30 Identification Codes and Passwords for access level controlThe controller and software comply with the 21 CFR part 11 standard
• Innovative Multi-Color DisplayMulti-color display for easier readingColor is used to indicate the stage of the cycleQuick access to important information26 LanguagesBuilt-in view of historical cycle data
