Description
Description: LabTower RO 40L/hr.
Permeate performance: 40 L/hr. at 10°C
Electrical Requirements: 100/240 V 50/60 Hz
Unit Size: Each
Advanced technology in a mobile design:
• An ultra-modern microprocessor control provides easy-to-read system parameters.
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
• System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
• A built-in pretreatment unit — consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge — protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages. Compact and mobile design:
• System includes three system options with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation.
• Systems can be upgraded later to accommodate growing water capacity demands. Integrated 100L reservoirL
• System stores 100L of RO water in a high-purity polyethylene PE opaque reservoir.
• Adjustable reservoir volume can be programmed for times of low demand—dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc. Easy-to-operate clear display:
• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
• Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
• Reservoir fill-level is shown as a percent.
• System parameters are code-protected to prevent accidental changes to set points. GLP-compliant documentation:
• LabTower RO has been developed to fulfill GLP requirements.
• Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm^-1.Pretreatment:
• External Pretreatment required
