| Description | Autoclave bags (HDPE) |
|---|---|
| Dimensions (L x W) | 660 x 305mm |
| Length (Metric) | 660 mm |
| No. per Case | 200 |
| Temperature Range (Metric) | 121°C |
| Width (Metric) | 305 mm |
| Length (English) | 26 in. |
| Material | HDPE |
| Width (English) | 12 in. |
| Unit Size | Each |
Answer:The HDPE bags measure 660 × 305 mm and are supplied 200 per case.
Answer:No. It is the HDPE version suitable for approximately 121 °C cycles; high-temperature polypropylene variants are separate products.
Answer:No. Adequate inactivation depends on the waste load, appropriate cycle parameters and the facility's validated procedure.
Thermo Scientific Sterilin Autoclave Bags are disposable high-density polyethylene waste bags intended for handling laboratory material requiring microbial inactivation before disposal. This version measures 660 × 305 mm and is supplied in cases of 200. The bags carry a blue biohazard symbol to help identify contaminated laboratory waste and can be placed in suitable autoclave bag holders during collection and processing. The HDPE format is intended for sterilization conditions up to approximately 121 °C; it is not the polypropylene high-temperature version designed for higher-temperature cycles. Autoclave treatment must use the facility's validated loading, venting and cycle requirements to allow steam penetration of the actual waste. These bags are not reusable sample-storage containers and should not be relied upon to safely contain sharp instruments or incompatible chemicals. Select the correct bag material, dimensions and autoclave program before use. Disposal must follow applicable laboratory waste procedures.
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
