Description
Type: Analytical Split-Loop Thermostatted Well Plate Autosampler
Unit Size: Each
Flexible Formats for Low-Flow ApplicationsThe sample rack handles up to three well plates (96 or 384 wells—sealed or unsealed) or sample vial trays in any combination. Run your samples in the same format used for preparation. You can even exchange sample plates during a run. An optional cooler preserves thermolabile samples by chilling to 4°C. The UltiMate 3000 RSLCnano Well Plate Autosampler (WPS-3000TPLRS) is the ideal solution for chromatographers looking to work with the highest injection precision at nano, capillary and micro flow rates in UHPLC applications.Maximize Throughput
• Three-well plate capacity holds up to 1152 samples
• Large injection range from 10nL to 125μL offers application flexibility
• Stable injection valve pressure extends up to 90MPa
• Thermostatted sample compartment keeps temperature constant from 4 to 45°C or 22°C below ambientEnsure Accurate Small Sample Performance
• Covered and thermostatted sample tray to protect thermo- and UV-labile samples
• Dual-needle injection principle to minimize sample loss
• Injection precision <0.25% RSD at 5μL (typically <0.15% RSD)
• Low carryover (typically <0.01%)
• Injection MechanismUsing the dual-needle principle, the vial septum of the well seal is pierced by the stainless steel outer needle. The sampler guides the fused silica capillary sampling needle through the piercing needle down to the bottom of the sample carrier. Sample needle height is easily programmed to match sample vial or well depth. Injections of minute sample volumes with virtually zero sample loss—1μL injection per 1μL sample—are performed using the μL-pickup routine. This routine is of particular importance when injecting protein samples that cannot be diluted without the risk of protein loss or alteration.
