Thermo Fisher, 6720.0405A, Viper™ TQ MS Connection Kits for Vanquish™ LC Systems

Viper™ TQ MS Connection Kits for Vanquish™ LC Systems is designed for connecting a Vanquish LC or UHPLC system to a compatible mass spectrometer with low-dead-volume fluidic and signal connections. The Viper TQ connection kit includes the connectors and capillaries required for the MS front-end interface, rather than a standalone column or analytical detector. The fitting design seals at the tubing tip to minimize unswept volume and limit extra-column dispersion that could reduce chromatographic resolution. Wetted connection materials include MP35N and shielded fused silica. The kit supports a maximum pressure of 1517 bar, providing a pressure-compatible connection option for high-pressure UHPLC installations. It can be integrated with Vanquish Core HPLC, Vanquish Flex UHPLC and Vanquish Horizon UHPLC systems as part of an LC-MS setup. Fingertight Viper TQ fittings simplify fluidic installation and facilitate routing the LC outlet toward the mass-spectrometer interface. The kit supports dispersion-optimized LC-MS configurations where the connection between the chromatographic separation and the mass spectrometer needs to preserve sharp peaks. This is a dedicated connection kit; it does not substitute for the mass spectrometer, LC pump or detector required elsewhere in the analytical system. The kit's high-pressure connection specification applies to the fluidic interface; it does not imply that every connected module has the same permissible operating pressure. System operating conditions remain limited by the lowest-rated installed component.