Description
Chamber Material: PTFE
Unit Size: Each
Features:
• Lid latch with safety sensor
• Phenol-free lid gasket
• PTFE-coated aluminum chamber with Hastelloy shaft
• 300-watt heater
• Microprocessor-controlled programming for run time from 1 to 999 minutes, heat from OFF to HI (100°C) in one degree increments, and heat time from 1 to 999 minutes. Memory stores 1 to 9 programs.
• LCD for display of program number, actual and set point temperature, heater time remaining, and run time remaining.
• Control panel with RUN/STOP button, PREHEAT button, set point SELECT button, increase/decrease buttons, and 3 Quick-Start buttons.
• Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm
• Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed.
• Automatic vacuum release valve.
• Built-in vacuum delay allows rotor to achieve speed before applying vacuum.
• Audible alarm to signal completion of set point run time.
• 1/2 in. OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included.
• Vacuum port with quick disconnect fitting for 1/4 in. ID tubing.
• Reverse IEC electrical receptacle on the back to connect accessory vacuum pump to the system.
• Components in the vapor path are constructed of corrosion-resistant materials for long life.Required Accessories:
• Diaphragm or Rotary Vane Vacuum Pump
• CentriVap Cold Trap if using a Rotary Vane Vacuum Pump
• Rotors
• Sample tubesOptional Accessories:
• CentriZap Strobe Light
• Vacuum Controller
• Laboratory Carts