| Air Supply | 5.5 bar (80 psi) nominal, 4 bar (60 psi) minimum - for AuditCheck and/or pneumatic rejector (not required for electronic rejector) |
|---|---|
| Certifications/Compliance | cCSAus, CE; ISO9001 certified |
| Communications | Optional ModBus serial or Ethernet modules |
| Construction | Stainless steel 304 straightlined case, high polish optional. All plastics used are FDA approved. |
| Description | APEX 500 Rx Metal Detector |
| Electrical Requirements | 85/260 V AC single phase plus earth ground; 47/65 Hz, 100 watts max. |
| For Use With (Application) | Metal detection: Pharmaceuticals |
| IP Rating | Type 3 enclosure, metal detector and control panel only |
| Input Allocation | Speed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset |
| Input Applications | Speed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset |
Unless otherwise stated, the minimum order amount is USD 1,000.
For orders below USD 1,000, an additional handling fee may apply, or we may arrange local delivery / local handover where available.
All quotations are subject to final confirmation, including product availability, lead time, batch information, shipping cost, and applicable export or handling requirements.
For quotation requests, please send an RFQ from website or contact:
Please send inquiries directly to us in the “To” field. Emails sent via BCC, mass mailing, or with unrelated recipients may be automatically filtered and will not be processed.
| Input Types |
|---|
| 6 Inputs - Active 12VDC+ 12 V auxiliary supply for input sensors |
| Operating Temperature | -10°C to +40°C (14°F to 104°F) |
|---|
| Output Allocation | Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu) |
|---|
| Output Applications | Reject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu) |
|---|
| Output Types | 6 Relays outputs; Relays: 250 volt AC 2 amp max. 50 volt DC 1 amp max. |
|---|
| Relative Humidity | 20 to 80% non-condensing |
|---|
| Sensitivity | Detects metal contaminants as small as 0.3 mm |
|---|
| Speed | 0.5 m/min. (1.7 ft./min.) to 100 m/min. (330 ft./min.) for the system |
|---|
| Languages | English |
|---|
| Unit Size | Each |
|---|
