Description
Pressure Range: -12 to +100 psi
Unit Size: Each
Key features • Measure pressure, 0.05% of full scale with internal sensor up to 5000 psi/345 bar sensor (5000G model) • Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24 V loop power • Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules 1/8 NPT female pressure fitting • Compatible with non-corrosive Gases and liquids • Select eleven different engineering units • Zero, min, max, and hold functions • Calibrate P/I instruments with simultaneous pressure and current measurement • Pressure switch test function captures set, reset and Deadband values of a pressure switch • Error % calculation of mA measurements for quick pass-fail decisions • Long lasting battery life • Holster features test lead storage • Compatible with Toolpack magnetic hanging system • New switch test The Fluke 717 Pressure Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 750 Series Documenting Process Calibrators, the Fluke 717 Pressure Calibrator is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. The Fluke 717 Pressure Calibrator is compatible with Fluke 700Pxx differential, gauge and absolute pressure modules to increase functionality. Specifications Measurement Accuracy Pressure Range: 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.76 kPa) Resolution: 0.1 psi, 1 mbar, 0.1 kPa Over pressure: 2 x full scale Loop power: Range 24 V DC Accuracy ±10% Drive; 20 mA into 1000 ohms for battery > 6.8 V; 700 W for battery 5.8 to 6.8 V Display: Clear 5 digit LCD Environmental Specifications Operating temperature -10°C to 55°C Storage temperature -40°C to 60°C Humidity (without condensation) 95% (10°C to 30°C) 75% (30°C to 40°C) 45% (40°C to 50°C) 35% (50°C to 55°C) Operating altitude 3,000 M max Safety Specifications Safety CSA C22.2 No. 1010.11992 Mechanical and General Specifications Size (L x W x H) 201 x 98 x 52 mm (7.93 x 3.86 x 2.06 in) Weight 22 oz, approximately 600 G with holster Warranty 3 years Shock and vibration Random, 2 G, 5-500 Hz 1 m drop test Battery type Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline Model: FLUKE-717 1000G Fluke 717 1000G Pressure Calibrator 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa ) Includes: • Protective Yellow Holster with test lead storage • Instructions Sheet (14 languages) • single 9V alkaline battery • Test Leads and Alligator Clips • NIST- traceable calibration report and data
