Description
Pressure Range: -1 to +1 psi
Unit Size: Each
Key features • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field • Error % calculation for quicker pass/fail decision making in the field • Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage • Min/Max/Hold to capture changing measurements • Switch test feature for quicker and more accurate pressure switch testing • New 1 and 300 psi pressure ranges mean fewer extra tools required • 1, 30, 100 & 300 psi ranges now available The complete solution to pressure calibration The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field. Specifications Technical specifications Range: -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa) Resolution: 0.01 psi, 0.1 mbar, 0.01 kPa Over pressure: 2 x full scale Functions: Zero, Min, Max, Hold, Damp General Specifications Maximum voltage: 30 volts (non-operating) Temperature: -40°C to 60°C Operating temperature: -10°C to 55°C Relative humidity: 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C) Operating altitude: 3,000 M max Shock: 1 M drop test Vibration: Random, 2 g, 5 Hz – 500 Hz Safety: CSA C22.2 No. 1010.1: 1992 EMC: EN50082-1: 1992 and EN55022: 1994 Class B Size: 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) Weight: 992 g (35 oz) Power, battery life: 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 Battery life: 4 to 20 hours typical, depending on functions used Warranty: Three years (one year on pressure pump in Fluke 718) Display: LCD, 5 digit pressure and current simultaneous For use with non-corrosive gasses Model: FLUKE-718 100US Fluke Pressure Calibrator 100 Psig (-12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)) Includes: • Protective Yellow Holster with test lead storage • Instructions Sheet (14 languages) • Test Leads and Alligator Clip • Two 9V alkaline batteries • NIST - Traceable calibration report and data
