Description
Unit Size: Each
Fluke i30S AC/DC Current ClampKey features The i30s current clamp is based on Hall effect technology for use in measurement of both dc and ac current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. General specifications Maximum conductor size: 19 mm (.748 in) diameter Output connection: Safety BNC connector, supplied with safety 4 mm (.157 in) adapter Output zero: Manual adjust via thumbwheel Cable length: 2 m (6.56 ft) Operating temperature range: 0 °C to +50 °C (-32 °F to 122 °F) Storage temperature range (with battery removed): -20 °C to +85 °C (-4 °F to 185 °F) Operating humidity: 15 % to 85 % (non-condensing) Weight: 250 g (.55 lb) Dimensions (HxWxD): 183 mm x 71 mm x 25 mm (7.2 in x 2.8 in x 1 in) Warranty: 1 year Electrical specifications Specified current range: 30 mA to 30 A DC 30 mA to 20 A AC rms Usable current range: 5 mA to 30 A DC 30 mA to 20 A AC rms Crest factor: 1.4 Output sensitivity: 100 mV/A Accuracy (at +25 °C): ± 1 % of reading ± 2 mA Resolution: ± 1 mA Load impedance: > 100 kΩ Conductor position sensitivity: ± 1 % relative to centre reading Frequency range: DC to 100 kHz (- 0.5 dB) Phase shift below 1 kHz: < 2 degrees Temperature coefficient: ± 0.01 % of reading/°C Power supply: 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator Working voltage (see Safety Standards section): 300 V ac rms or dc Safety standards BS EN 61010-1: 2001 BS EN 61010-2-032: 2002 BS EN 61010-031: 2002 300 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz. EMC Standards EN 61326: 1998 +A1, A2, & A3
