Description
Unit Size: Each
Fluke IBT6K T6 Electrical Tester + Insulated Hand Tools Starter Kit (5 Insulated Screwdrivers and 3 Insulated Pliers) Roll-up Tool Pouch Fluke’s T6-1000 Electrical Tester with integrated FieldSense technology lets you quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads. * Voltage measurement requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations. Key features: T6-1000 Electrical Tester • 3 slotted insulated screwdrivers • 2 Phillips insulated screwdrivers • 3 insulated pliers • Roll-up tool pouch Fluke T6-1000 Electrical Tester: Measure voltage to 1000 V ac through the open fork, without test leads No need to open covers or remove wire nuts Simultaneously measure voltage and current 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2) Go beyond simple detection. Actually measure ac voltage and current values without test leads. Slotted screwdrivers: Three different bladeforms Three handle lengths Phillips screwdrivers: #1 and #2 tips Two handle lengths Long nose pliers with side cutter and gripping zones Unique milled wave pattern gripping zones: 4 gripping points for pulling round objects with superior grip that won't slip Straight, half-round, long and slim knurled jaws, specially profiled Side cutting edge for wire cutting Heavy duty, high leverage diagonal cutter: Cuts hard materials including steel and piano wire Power joint and precision cutting edges Heavy Duty Combination Pliers: Secure hold by aggressive serrated jaws and 4-point gripping hole Slim shape for better access to wires in tight spaces Powerful gripping jaw, yet 20% lighter weight than other designs Recommendations for use and in-service care of Fluke Insulated Hand Tools: The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools. Warning – to avoid electrical shock or personal injury: Keep fingers behind the finger guards of the tool. Never touch conductive parts. Always wear approved eye protection. Do not use in wet or damp locations. Do not use unless the tool is clean and dry. Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage. If the tool is used in a manner not specified, the protection may be impaired. Storage: Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation. Inspection before use: Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use. Temperature: Insulated Hand Tools should be used only in environments having temperatures between –20 °C and +70 °C and, for tools marked “C”, between –40 °C and +70 °C. Periodic examination and electrical retesting: An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed. Includes: • Fluke T6-1000 Electrical Tester • ISLS3 Insulated Slotted Screwdriver 3/32, 3 • ISLS5 Insulated Slotted Screwdriver 5/32, 4 • ISLS8 Insulated Slotted Screwdriver 1/4, 5 • IPHS1 Insulated Phillips Screwdriver #1, 3 • IPHS2 Insulated Phillips Screwdriver #2, 4 • INLP8 Insulated Long Nose /w Side Cutter and Gripping Zones • INDC8 Insulated Heavy Duty High Leverage Diagonal Cutter • INCP8 Insulated Heavy Duty Linesman Combination Plier • RUP8 Roll up pouch • Warranty: 1 year
