Description
Unit Size: Each
Fluke Insulated Slotted Screwdriver 4 MM X 100 MM 1000VThe job isn't finished until everything is tightened down. Precision insulated tools fit and grip the fastener properly to apply maximum torque without damage to the head. Hardened chromium-molybdenum-vanadium (CMV) steel blades minimize wear. The last thing you want is to have your driver slip out of the screw head and possibly contact a nearby live conductor.Fluke offers three sizes of slotted screwdrivers. All certified to 1000 volts AC and 1500V DC. Every screwdriver individually tested to 10,000 volts and backed by a limited lifetime warranty.Key features:
• Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque.
• Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design.
• Slim insulated shaft allows access in hard to reach areas.
• Manufactured from CMV steel for superior durability.Recommendations for use and in-service care of Fluke Insulated Hand Tools:The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools.
• Warning – to avoid electrical shock or personal injury:Keep fingers behind the finger guards of the tool. Never touch conductive parts.Always wear approved eye protection.Do not use in wet or damp locations.Do not use unless the tool is clean and dry.Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.If the tool is used in a manner not specified, the protection may be impaired.Storage:Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation.Inspection before use:Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.Temperature:Insulated Hand Tools should be used only in environments having temperatures between –20°C and +70°C and, for tools marked C, between –40°C and +70°C.Periodic examination and electrical retesting:An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.
