Description
Type: Turbidity Meter
Unit Size: Each
Greater accuracy, less maintenanceHach Solitax sc sensors provide accurate, colour-independent measurement of turbidity and suspended solids in drinking water, wastewater and industrial process applications. A self-cleaning device prevents biological growth and interference of gas bubbles. This system’s reliable performance and full data communication capability help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling.Excellent correlation to laboratory analysisSolitax sc sensors show an exceptional correlation to laboratory analysis. On-line measurement not only saves time on manual analysis, but also provides critical real-time measurements that can be used to operate the plant more efficiently.Fully serviceable sensorsConventional turbidity and suspended solids sensors are potted and are discarded when they no longer function. Solitax sc sensors are fully serviceable, which often doubles the useful life of the sensor.Easy one-point calibrationFactory calibrated in conformity with DIN EN ISO 7027 for long-term calibration stability. Calibration is easy with a simple correction factor procedure.Multi-channel, multi-parameter systemMultiple Solitax sc sensors can be installed on one Hach SC Controller. The same controller can also accommodate any combination of parameters. All of Hach’s model sc sensors are “plug and play” with no complicated wiring or set-up procedure necessary.What's included?Turbidity/Suspended Solids probe, user manualSpecificationsAccuracy: Turbidity up to 1000 NTU: without calibration < 5% of the measured value ±0.01 NTUwith calibration < 1% of the measured value ±0.01 NTUAutomatic Wiper: YesBody Material: Stainless SteelCable Length: 10 m (optional extension cables available)Calibration Method: Turbidity: Formazin or STABLCAL Standard (at 800 NTU).Suspended Solids: Sample specific, based on gravimetric TSS analysis with a correction factor procedure.Certifications: CEConfigurations: Sensor onlyController: Sensor onlyDiameter Sensor: 60 mmFlow: Max. 3 m/s (the presence of air bubbles affects the measurement)Includes: Turbidity/Suspended Solids probe, user manualLength: 200 mmMaintenance Interval: 1 h/monthMaterial: Optics Carrier and Sleeve: stainless steel 1.4571; Wiper Arm: stainless steel 1.4581; Wiper Rubber: silicone rubber (standard) Optional: Viton (LZX578); Wiper Shaft: stainless steel 1.4571Max. cable length Sensor-to-Controller: 100 mMeasuring Principle: Infrared Duo scattered light technique for color-independent turbidity measurement Turbidity in accordance with DIN EN ISO 7027 / TS equivalent DIN 38414Model: Solitax ts-line scMounting: ImmersionOperating temperature range: 0 - 40 °CParameter: Suspended Solids, TurbidityPressure Range: Stainless steel insertion sensor: <6 bar or <60 mRange: TSS-content: 0.001 mg/L - 50 g/LTurbidity: 0.001 - 4000 NTURepeatability: TSS content: < 3 %Turbidity: < 1 %Response Time T90: 1 - 300 s adjustableSpecial notes: installation note: distance sensorwall > 50 cm (Turbidity);distance sensorwall>10 cm (TSS),Weight: 1.38 kgWhat's included?: Turbidity/Suspended Solids probe, user manual
